Page 2 of 2

Re: June 2009. a0a2 853850c dg-16d2s-09c.

Posted: Tue Feb 02, 2010 4:09 pm
by jts1178
I believe this might be the answer. Correct me if Im wrong.
http://www.acidmods.com/forum/index.php?topic=33994.0" onclick="window.open(this.href);return false;

Re: June 2009. a0a2 853850c dg-16d2s-09c.

Posted: Tue Feb 02, 2010 4:24 pm
by jts1178
Maximus Xtractor Vampire.Here might be another answer as well.
http://www.360xtractorpro.com/360xtractorpro/index.html" onclick="window.open(this.href);return false;

Re: June 2009. a0a2 853850c dg-16d2s-09c.

Posted: Tue Feb 02, 2010 5:11 pm
by chrislfc
i had this problem but i was flashing back to stock i could not get the key out and couldn't fine the original at first but found it later so then i flashed it back to stock with the original key an F/W so then out of curiosity i tried to get the key again an it come out first try

Re: 2009. a0a2 853850c dg-16d2s-09c Maximus Xtractor vampire

Posted: Sat Jul 17, 2010 5:30 pm
by jts1178
It is a pain!!!
Part 1 http://www.youtube.com/watch?v=HzBr1dT4vt8" onclick="window.open(this.href);return false;
Part 2 http://www.youtube.com/watch?v=xDz5-EDK" onclick="window.open(this.href);return false; ... re=related
Part 3 http://www.youtube.com/watch?v=dfxkjspT" onclick="window.open(this.href);return false; ... re=related
:o

Re: 2009. a0a2 853850c dg-16d2s-09c Maximus Xtractor vampire

Posted: Sun Jul 18, 2010 4:17 pm
by HaGGardSmurf
Well this is definitely a v2 drive.

All you need to do is cut 2 traces, and either probe, or solder in the lt switch, then you can read the drive, then either repair the traces, or bridge them with the probe, and flash the drive like a 7 series.