Robin Hoods Playground

CoFree wrote:any that will open v15.1 should work
or
you can update the def file in iprep and it will load the v1.6 firmware.

intheshade wrote:there is really no reason for 360 mod disc not to work,

ok man think about this

he has a drive that does not have firmware on it at all(at this point)
when you boot on the mod disc
it dumps the drive
builds the hack firmware
and flashes it in.
but
the problem is
it cant build the hacked firmware (and work) because there is no key.
so at this point there just is no way for mod disc to get his key and flash his drive and it work.

I know you are the owner of this site, but you are wrong, 360 mod disc will flash it, it might not put the right key. but it will make it where the drive will eject once again. watch the 3 videos i posted. this guy clearly stats this also. you were asking me to read all posts before i offered advice, but i was saying the whole time that you would need to get back in jungleflasher to finish the flash.

intheshade wrote:

CoFree wrote:any that will open v15.1 should work
or
you can update the def file in iprep and it will load the v1.6 firmware.

intheshade wrote:there is really no reason for 360 mod disc not to work,

ok man think about this

he has a drive that does not have firmware on it at all(at this point)
when you boot on the mod disc
it dumps the drive
builds the hack firmware
and flashes it in.
but
the problem is
it cant build the hacked firmware (and work) because there is no key.
so at this point there just is no way for mod disc to get his key and flash his drive and it work.

I know you are the owner of this site, but you are wrong, 360 mod disc will flash it, it might not put the right key. but it will make it where the drive will eject once again. watch the 3 videos i posted. this guy clearly stats this also. you were asking me to read all posts before i offered advice, but i was saying the whole time that you would need to get back in jungleflasher to finish the flash.

ive actually tried this method before posting this thread and it did not work. when "reading bank 0" it would just stay there with no "ok!"

I don't want to argue but you may need to watch the video too. 360 mod disc will ask you if the read was successful, and No Matter what you are suppose to answer yes. I am using 360 mod disc v1.6.

intheshade wrote:I don't want to argue but you may need to watch the video too. 360 mod disc will ask you if the read was successful, and No Matter what you are suppose to answer yes. I am using 360 mod disc v1.6.

lmao its cool, i dont wanna argue either cuz u just wanna help. but the problem is when it reads bank 0 it stays at 3 dots with no "ok!". with that being said i cant really do anything while its reading. ima try one more time now before moving on to the method described earlier in the post.

have you been entering the correct sata port in the 360 mod disc? i had to use jungleflasher to find the correct sata port. you cant use the one that the guy uses in the video. if you can go to jungleflasher and remember which port was selected, write it down than enter it when 360 mod disc prompts you to.

intheshade wrote:

CoFree wrote:any that will open v15.1 should work
or
you can update the def file in iprep and it will load the v1.6 firmware.

intheshade wrote:there is really no reason for 360 mod disc not to work,

ok man think about this

he has a drive that does not have firmware on it at all(at this point)
when you boot on the mod disc
it dumps the drive
builds the hack firmware
and flashes it in.
but
the problem is
it cant build the hacked firmware (and work) because there is no key.
so at this point there just is no way for mod disc to get his key and flash his drive and it work.

I know you are the owner of this site, but you are wrong, 360 mod disc will flash it, it might not put the right key. but it will make it where the drive will eject once again. watch the 3 videos i posted. this guy clearly stats this also. you were asking me to read all posts before i offered advice, but i was saying the whole time that you would need to get back in jungleflasher to finish the flash.

Show some respect here, CoFree gave advice on what he has found and trust me he knows hell of alot more than what we .do. Me personaly have never been able to get it to recover a drive. Like cofree said no FW = no drive

intheshade wrote:have you been entering the correct sata port in the 360 mod disc? i had to use jungleflasher to find the correct sata port. you cant use the one that the guy uses in the video. if you can go to jungleflasher and remember which port was selected, write it down than enter it when 360 mod disc prompts you to.

yeah i used my sata port wich is DCD0. this is literally like the 8th time i tried lmao. maybe this is gonna be my lucky number???

i have EVERYTHING. the original firmware, the key, the spoofed firmware, the ixtremefirmware before it was spoofed. it just a matter of erasing the bad write on my drive and writing in a new one

intheshade wrote:but you are wrong, 360 mod disc will flash it, it might not put the right key

well you may have me there
im sure it will flash what is on the disc as long as you have the port right

but
as far as im concerned getting the drive working is all that matters
so getting firmware in that has a key
will save you a step.

but yea guys lets
get this thread back 100% on track.

budokai666
you need to pick how you want to try to recover this drive and stick with it.
so the guys can help you
we all got out of line by jumping all over the place with you.
thats over now
post your question and we will do our best.

ok thank you

first how do i erase the firmware on my drive? if i connect it and turn it on (while on my desktop) i cant access any programs to erase the bad write.

i cant offer much
a bad flash is going to lock up windows ever time
as far as i know

CoFree wrote:i cant offer much
a bad flash is going to lock up windows ever time
as far as i know

i see, so i have to erase it from boot or something?

well when you go to flash in dos with iprep or mod disc it will erase before it flashing over
or should

CoFree wrote:well when you go to flash in dos with iprep or mod disc it will erase before it flashing over
or should

so thats great! i just need to get a floppy disk sadly (my pc cant boot from usb). now when i get the floppy disk tomorrow how do i prepare it?

i time my comp. it freezes for 2 mins and works for 5secs lol.

so technacly i can still erase from my desktop. or will this just damage my drive further?