Robin Hoods Playground

What was the two errors?? You shouldn't get any errors for it to work properly.

TurbotimE wrote:I got iprep working!!!!!!!!!
now, under the mtkflash box, i have a mtkflash and DoSflash compatible in green.........NVIDIA MCP61 Serial ATA controller....all good so far?

in the samsung box i had samsung ixtreme 1.41, in the benq box i had benq ixtreme 1.41.....i clicked prepare destination, got 2 errors, but the a success message........that good?.......

these are now the contents of my MS.......its now called IPREP_101, and it contains:-
3 folders(BACKUPS, CFW, and Tools)
8 bat files(Autoexec,dben,dsam,fben,fsam,intro,rben,rsam

does this sound right?

There is no such release as samsung 1.41 !

Only the benq release was revised. would be interested in knowing what the errors are.

As for contents.. yep, looks ok 2 me

Before you go any further lets clarify some details...

what drive are you flashing??
If you are flashing a BenQ you only need the BenQ firmware & vice versa for the samsung.

If you plan to flash multiple drives then fine.. prepare the flash key/floppy with both

if not.. then don't add them to the arrangement as this could confuse matters for yourself

but isnt the samsung firmware needed for me to be ableto format a drive?........also, how do i find the 4 character port number?..........in iprep i used, it isnt shown!

ok.......i managed to format the usb using only the benq fw.....still had 1 error though.......now have the 3 folders as before, now only have 5 bat files......

TurbotimE wrote:but isnt the samsung firmware needed for me to be ableto format a drive?........also, how do i find the 4 character port number?..........in iprep i used, it isnt shown!

nope.. you only need 1 firmware loaded to "prepare destination"

port number?? ...expand

TurbotimE wrote: ok.......i managed to format the usb using only the benq fw.....still had 1 error though.......now have the 3 folders as before, now only have 5 bat files......

what was the error??

the tutorial i have here printed(from 360mods), says i have to enter a port number in dosflash eg. DosFlash r xxxx a0 1 4 orig.bin 0
where x is the port number

ok.. forget that tutorial

you are using iprep 6 now & it configures everything for you - commands are also made simple there is a great video tutorial on here that explains it all.

http://www.robinhoodsplayground.com/for ... =110&t=277

MsK wrote:

TurbotimE wrote: ok.......i managed to format the usb using only the benq fw.....still had 1 error though.......now have the 3 folders as before, now only have 5 bat files......

what was the error??

exception processing message c00000a3 parameters 75b6bf7c 75b6bf7c 75b6bf7c

thanx for the video link........i was rapidly giving up hope on that tut........it used older iprep also which sucked as i couldnt follow it to the letter.............thank you all;)

TurbotimE wrote:

MsK wrote:

TurbotimE wrote: ok.......i managed to format the usb using only the benq fw.....still had 1 error though.......now have the 3 folders as before, now only have 5 bat files......

what was the error??

exception processing message c00000a3 parameters 75b6bf7c 75b6bf7c 75b6bf7c

Thats a windows error not an iprep error... google gods should resolve that 1 for you

http://www.google.co.uk/search?hl=en&q= ... arch&meta=


Just make sure after you do your dump // you boot back into windows & check the dump & key... also back it up somewhere safe

so i dont need to use dosflash at all?..............also, what is the 2 second d1 thing?
so i need fwtoolkit for checking the key, and creating my personal hacked fw? the vid dont show that

Am i right in thinking i need fw toolbox for checking keys, dumps etc......?.......also, what do i use to get the key from my orig.bin to the hacked.bin?

the video shows all that
it will build your hacked firmware after the dump.just like in the video.
firmware toolbox is a program that you load your firmware into and it will show you your key

TurbotimE wrote:so i dont need to use dosflash at all?..............also, what is the 2 second d1 thing?
so i need fwtoolkit for checking the key, and creating my personal hacked fw? the vid dont show that

iprep uses mtkflash & simplyfies the command lines down. it also builds your hacked firmware automaticly after the dump.. Just follow the video tut & read the on screen prompts


as for the d1.. if that doesn't work then the process halts
It's basicly the initial reading & accessing of the drive
If you get stuck here it's most likely a problem with your sata chipset/card

firmware toolbox can flash certain drives under windows & it can handle most drive dumps/firmwares for checking/ modifying keys / spoofing etc. use it in this case only to validate your key

TurbotimE wrote:Am i right in thinking i need fw toolbox for checking keys, dumps etc......?.......also, what do i use to get the key from my orig.bin to the hacked.bin?

as explained above.. iprep will automate the process

awesome!!!!!...so the trick is when the dump and create is done, then i take 1 of my orig.bin and check the key, also take my hacked.bin and see if the key matches?..........if it does, then i just boot to my flash stick again and flash the hacked.bin?..........am i getting that right?