Robin Hoods Playground

ok i got , i have my dvd key , but one thing that i didnt get , cofree using an old iprep , so when i opened my iprep 10.7 i didnt see the same files that he has it in the tut , so plz i just need which files to delete , cos now when i reboot from the usb flash i got just like am starting from the beginning , so i think there r some files that i have to delete them from the boot frive , so plz i need your help.

when you make a boot up from iprep the file you need to keep is the dos file than next you need the Lite-On-Erase copy the file in your use drive

if you don't have Lite-On-Erase
you can download xbin here
viewtopic.php?f=112&t=48" onclick="window.open(this.href);return false;

ok i got the lite_CFW.bin , and i got the ixtreme1.5 dos files , but can i use the iprep10.7 to this ? i really appreciate your help ,

yes you can if that don't work
you can do it this way too
http://www.se7ensins.com/forums/firmwar ... 1-8-a.html" onclick="window.open(this.href);return false;

you just need a boot up in this Tutorials

k darktron , i did the dos flash boot in iprep10.7 , so i deleted the two folders , but i still have 8 files , (Autoexec.bat,config.sys,Dosflash.exe,Info.bat,iOpts.cfg,iprep.exe,L83.bat,litetool.exe) so which to keep it and which one to delete it , i know i have to copy the lite_cwf.bin and the content of dos folder in ixtream , plz thnx for your help

all you need is autoexec,dosflash,dosflash.typ,lite-on-erase,l-o-eras that all the file you need and your Lite_CFW.bin.
from there your rdy to fix your drive and flash

i really really really appreciate for your help and thnk u so much , i will try it now , i dont want to give you more headace GOD bless you . i will try it now , so if u still here i will let u know , thnx again my friend.

i hope it go well with you.
if you need help let me know

it says badcommand or file name , i kept the files that u mentioned with the bin and the dos contents , i really nervous , i dont know what to do

give me a 3 min i help you out going on my laptop

its still saying badcommand or file name , but when i typed l-o-eras.exe and the port , i got ff80 , ok i did again i got ff80 again , where is the problem

do you have a via card card
have you make sure you have COM port: com1 in iprep?
i never use iprep 10.7 but you can try iprep 0008.8 you can download it from xbin
make a boot drive again and do the same thing last time

o ya what port you have set for flash the drive tell me i think i maybe know

yah i have , i bought the same card that cofree mentioned , but now am trying something else , do u thin the problem with iprep 10.7 ?

the flash drive is I , and my sata port is DC00