Robin Hoods Playground

Yeah, if your going to use iprep to flash it with, create a folder called 1234567 and then inside that folder create another folder called 12345. Then inside the 12345 folder put a copy of your hacked firmware. Rename it to ben-cfw. Then if you haven't already, create your usb boot media with iprep. After thats done, open it up in windows and find the backups folder. Then copy your 1234567 over into the backups folder. You want the 1234567 folder and all the contents inside it copied into the backups folder. That way if you were to look at a directory map of it, it would be \backups\1234567\12345\ben-cfw.bin.

Once your in iprep, press y to agree then type 'fben 1234567 12345' without the quotes and hit enter, then follow the on screen instructions and you should be good.

So I DONT put NO FIRMWARE in the in IPREP, where it says BENQ FIRWARE or SAMSUNG FIRMWARE, correct?

I just put the firmware from my usb backup/1234567/12345/.... folder when i boot from it

Yeah, prepare your boot media with iprep as normal. Only after you get it done, then copy the 1234567 folder into the backups folder that iprep created.

What goes in the top half in the iprep program. Samsung ixtreame firmware: Benq ixtreame firmware:

I put NOTHING in there?

You would put the hacked firmware from xbins there. If you want to do a samsung, then put the speed that you want of the hacked firmware in there, or if your doing a Benq, put the speed of the Benq hacked firmware from xbins there, or you could do both if you wanted, but all you need to put is the benq hacked firmware. You prepare the boot media with iprep just like you would as if your going to go through the whole routine, but instead of letting iprep dump and create the hacked firmware, your just using it to flash your own hacked firmware.

Do i TICK the two boxes in IPREP? PatchMTKFlash and Format/Make device bootable....

man have a look at the video guide for flashing a benq
you are ask question that it will answer
http://www.robinhoodsplayground.com/for ... =110&t=277" onclick="window.open(this.href);return false;

Yes. If you don't, then the media that you are preparing won't be bootable.

Just had a look at the video, now i know that you have to TICK the TWO boxes in IPREP.

When getting the original BenQ firmaware from : http://zkaerfdom.hostwq.net/_menue/Firmware.php" onclick="window.open(this.href);return false;

can I select any firmware from: 0320D, 60451D, 61111D, 61330D, 62430C/R, 64330D ,64930C ,70230D, or does it have to be a certain one?

And when spoofing the firmware in 360 FIRMWARE TOOL, do I select 'MASTER CHECKSUM' or 'CALCULATED CHECKSUM' ?

Wow, Don and NeoRio need to get together! No offense fellas, just messing with ya. Just push "flash" and hope like hell you got it right!!!!!!!!

Jman 31 wrote:Wow, Don and NeoRio need to get together! No offense fellas, just messing with ya. Just push "flash" and hope like hell you got it right!!!!!!!!

LOL, u didnt answer my questions

When getting the original BenQ firmware from : http://zkaerfdom.hostwq.net/_menue/Firmware.php" onclick="window.open(this.href);return false;

can I select any firmware from: 0320D, 60451D, 61111D, 61330D, 62430C/R, 64330D ,64930C ,70230D, or does it have to be a certain one?

And when spoofing the firmware in 360 FIRMWARE TOOL, do I select 'MASTER CHECKSUM' or 'CALCULATED CHECKSUM' ?

I have noooo Idea!!!!

When spoofing a firmware, leave the settings at the default settings. In this case, leave it set to Master Checksum.

As far as which version of Benq firmware to use, which one do you have? If there isn't one that matches yours in the retail section, get the closest above it. Always shoot for an upgrade as the 360 does not allow for downgrades. It all actuality, it isn't going to matter unless your trying to restore the drive back to stock. If your trying to flash hacked firmware, then you could get any retail firmware thats on thats listed for the benq's and it will work because the hacked firmware is all the same. If your trying to restore it to original, go for a version match or a version above what you have.

And yes, once you download the benq firmware, you'll find three bins in the rar. Just use the one without the 1 or the 2 on the end.