Page 3 of 3
Re: help
Posted: Fri Nov 06, 2009 10:17 pm
by iamwatt
hang around for one of the other mods to help you, i only use jungleflasher for hitachi drives and samsung drives are thee easiest drives to mod, then benq.
did you try changing the setting in the bios to Allow your computer to boot from a flash drive?
Re: help
Posted: Fri Nov 06, 2009 10:18 pm
by andipad
i have a samsung
Re: help
Posted: Fri Nov 06, 2009 10:31 pm
by iamwatt
andipad wrote:i have a samsung
i know. . .
Re: help
Posted: Fri Nov 06, 2009 10:33 pm
by andipad
when i try flashing again i get
Sending Device ID request to port 0xDCE0
Manufacturer ID: 0xBF
Device ID: 0xB6
Flash Name: SST(SST39SF020)
Flash Size: 262144 bytes
Getting Status from port 0xDCE0
Invalid Status 0xF0
Re: help
Posted: Fri Nov 06, 2009 11:33 pm
by andipad
are there any tut to flash a samsung ms28 using iprep
Re: help
Posted: Sat Nov 07, 2009 12:18 am
by andipad
one more question if anybody can answer i am going to flash samsung ms28 with iprep does the dvd drive have to be half way closed or no
Re: help
Posted: Sat Nov 07, 2009 1:14 am
by iamwatt
andipad wrote:one more question if anybody can answer i am going to flash samsung ms28 with iprep does the dvd drive have to be half way closed or no
no, follow the directions, iPrep walks you through it. use 10.7
Re: help
Posted: Sat Nov 07, 2009 1:17 am
by iamwatt
andipad wrote:are there any tut to flash a samsung ms28 using iprep
iprep 10.7 samsung tutorial