Robin Hoods Playground

I just read somebody got it to work via floppy, I tried that but still got the stupid reading bank 0... (freeze). I read one of the moderators said-

'do not have the 360 drive hook up to the sata cable till after the computer is booted up in dos.then hook up the sata cable to the 360 dvd drive.'

I'll try that after I get my system going again tonight...

I'll also try placing the SATA card in the pci slot closest to the ground. And lastly I'll try quickly turning it on-off-on...

Then its going back to the store

Ok did a complete system re-install, got everything up and running and once again, my favorite command prompt error is back...reading bank 0....................................................

i've lost all faith in iprep

Thanks guys but Im taking it back. Hope nobody else gets the unflashable benq

Well man sorry to here you gave up.

I can tell you that there is nothing wrong with Iprep101 v006.
I am sure that your BenQ can be flash it's just a matter of getting your things set up and working right.
If you get a different 360 with a BenQ i think you will find your self in the same spot.

If by chance you get a v79 hit drive.
That is when you have a drive that is going to be hard to flash.

Man i would love to get my hands on that BenQ drive you have.