Page 1 of 1
Trying to spoof Benq to Sammy
Posted: Tue Jan 12, 2010 9:37 pm
by gt0taku
I have a Elite 360 that has a Benq drive that is bad(won't read anything, just says open tray on anything i put in there) I only have a spare Sammy. I don't want to use any firmware out because I won't be using homebrew on this xbox360. I was able to extract the key from the Benq. I was wondering if someone can help me on spoofing Benq on Sammy and key without any hacked firmware just original firmware. Someone please help me, otherwise I will just have to order the laser lens and replace that on the benq. Thanks for the help in advance.
Re: Trying to spoof Benq to Sammy
Posted: Wed Jan 13, 2010 6:11 am
by commando_lee
Yeah we can help with that. Firstly do you have original fw for the samsung drive? if so make sure you have the correct one as there are 2 types off samsung ms25 & ms28
Re: Trying to spoof Benq to Sammy
Posted: Thu Jan 21, 2010 4:25 pm
by HAZ3
commando_lee wrote:Yeah we can help with that. Firstly do you have original fw for the samsung drive? if so make sure you have the correct one as there are 2 types off samsung ms25 & ms28
don't you mean to get the original firmware from the benQ instead as that's the original drive?
Re: Trying to spoof Benq to Sammy
Posted: Sat Jan 30, 2010 10:14 pm
by who_be_dat
Use jungle flasher, open up OFW from sammy to the target and benq OFW in source click spoof target as. Save new firmware then write it to sammy.