Robin Hoods Playground

i have a major prob lite on drive stuck in mod b
lite on drive some how got stuck in mod b and i don't have keys
when i stick drive back in green light flashes in mod b
need help bad

need a bit more explanation you only get into mode b with hitachi drives you need to explaine what steps you have taken to get in to mode b with a liteon drive

this is what i did i connected the ckc kit to it and try to read it i thought it was a benq at first
then realized it was a liteon drive by mis take i had hit mod b on kit and also realize my probe wire came off
then notice it got stuck in mod b need help bad

well like i said before you only use b mode for hitachi drives which liteon drive is it 7 series 8 series 8 v.2 or a 9 series you would only use a probe with a 7 series liteon sounds like you havent actually read any keys off it or erased the drive dont know how you have got a liteon in b mode i think you need COFREE to give you some advice on this one the normal way to get out off b mode is to power off and back on

hi i think its a 7 series v74 something another
i try power on and off nothing i stick it back in xbox360 mod b
just trying to get it back to the orig state
what else can i do

Try powering on the drive with tray in open position, will it detect in JF?

still not working is there another way to do this please and thank you

What progran did you use to flash drive?

try pressing outro/ATA (in mtk tab) reset that takes drives out of vendor that may work for getting i out of mobd-b or try getting the key with the probe it wont do no harm you can extract the key as many times as you want. me my self i ave never come across getting a lite-on in mode-b but i think you can only mess a lite-on up if you get a bad erase but not 100% sure

I was thinking the same thing, do what chris stated.

ok i got my drive detected in right side of jungleflasher
but still flashing in mod b
i try to get keys
read all banks but
says no dvd keys file maybe corrupt any suggesting

did you try the outro/ata

no more help from me no need for new post on the same topic

yes i tired that and nothing

can you see it in jungle flasher???


Can you eject the tray?

Are you using the probe to read the firmware?

Answer these question and we may be able to help u