Page 1 of 1
Erased Liteon Iprep won't load FW
Posted: Tue Feb 16, 2010 10:16 pm
by dustman1995
Hey guys,
Erased my liteon with JF and of course it froze up, (even with my new setup) very disapointing. So I have the hacked Lite_CFW.bin file built with the new LT firmware. Now when I go to load it into Iprep 11.6, it gives me an error that says
' A valid firmware source was not selected
Only Non-Patched firmwares can be loaded'
Can someone please point me in the right direction?
Re: Erased Liteon Iprep won't load FW
Posted: Wed Feb 17, 2010 10:22 pm
by dustman1995
Ok, here's what I did so far. I opened up the usb bootable drive and manually put in hacked firmware with the key into that folder. and in the backup folder 1234567/12345/ put the L74 CFW.bin in that was loaded previously from IPREP 11.6 then did write only. It brought my drive back to life, as in I can nowopen and close thetra but it won't play games. I'm doing something simple wrong butI don't know what it is. Help.
Re: Erased Liteon Iprep won't load FW
Posted: Wed Feb 17, 2010 10:36 pm
by cainhunpi
when I froze mine I used this tutorial
http://www.robinhoodsplayground.com/for ... 197&t=7041
It would not work with iprep 11, I had to find a copy of iprep 9 in some website that I can't remember right now
Re: Erased Liteon Iprep won't load FW
Posted: Thu Feb 18, 2010 10:34 am
by dustman1995
IPREP 9. OK I'll try that. If it doesn't load the new LT I'll just put in 1.6 CFW . Thanks
Re: Erased Liteon Iprep won't load FW
Posted: Sat Mar 27, 2010 2:13 pm
by Baja
when you stick the cfw into the folder on ur flash drive, r u replaceing it and renaming it with the cfw thats in the folder? i had this happen a few weeks ago and turned a drive into a vegetable but the key is to replace the cfw file with the 1 u patched in jf that way iprep finds that 1 for the flash afterwards, do a re-read and confirm that file in jf to make sure its all up to snuff
Re: Erased Liteon Iprep won't load FW
Posted: Mon Mar 29, 2010 6:27 pm
by Vdizzle
Im having the same issue and have been trying various things for hours!
In Iprep am i supposed to load the .bin i have created in JungleFlasher? If so get the same error below each time:
"A valid firmware source was not selected
Only Non-Patched firmwares can be loaded"
I tried to skip this stage (as i wasnt 100% i had to do this) and made a bootable usb with the bin file in the correct folder 1234567>12345
But when i ran L74 1234567 12345 W i am told that this is an invalid command!
Any ideas? any help? Would be much appreciated.
Re: Erased Liteon Iprep won't load FW
Posted: Tue Mar 30, 2010 9:38 am
by Vdizzle
Sorry people. Sorry to be a pain and my first post to be begging for help but i'm completely at a loss for what to do.
Any advice would be welcome.
Thanks