BENQ LT
Posted: Sat Feb 27, 2010 5:40 am
Has benq LT been released?
Robin Hoods Playground
Welcome to Robin Hoods Playground
http://www.robinhoodsplayground.com/forum/
BENQ LT
http://www.robinhoodsplayground.com/forum/viewtopic.php?t=11479
Page 1 of 2
Re: BENQ LT
Posted: Sat Feb 27, 2010 11:42 am
Last time i knew it was in final testing, i cant see it on Xbins so id say it hasnt yet.
Re: BENQ LT
Posted: Sat Mar 06, 2010 5:33 am
Now it is! http://www.console-spot.com/2010/03/06/ ... -touch-lt/" onclick="window.open(this.href);return false;SHINOBI247 wrote:Has benq LT been released?
Re: BENQ LT
Posted: Sat Mar 06, 2010 10:06 am
THANK YOU LETTING ME KNOW, JUST FLASHED TO THIS.
Re: BENQ LT
Posted: Mon Mar 08, 2010 2:51 am
Do you guys have a copy of the ixDef.xml needed for iPrep?
Re: BENQ LT
Posted: Mon Mar 08, 2010 6:23 am
YW!SHINOBI247 wrote:THANK YOU LETTING ME KNOW, JUST FLASHED TO THIS.
Re: BENQ LT
Posted: Mon Mar 08, 2010 9:09 am
Guys, I know that we are all excited about Benq LT being out, but I would probably hold off flashing until CoFree, Sadilus, Shootsteel, or one of the other mods tries this first. They can test all they want, but I am not risking it. Just my two cents.
Re: BENQ LT
Posted: Mon Mar 08, 2010 9:38 am
well
i have a few to flash now that im back
ill try to let you guys know
i have a few to flash now that im back
ill try to let you guys know
Re: BENQ LT
Posted: Mon Mar 08, 2010 12:13 pm
I've flashed a few and it works great so far. As far as iprep. I think you might should wait just a little bit. I think they need to test and see if firmtool will handle building a new firmware based off the Benq LT. It may need more than just a new ixdef file.
Re: BENQ LT
Posted: Mon Mar 08, 2010 7:27 pm
OK so we are good to go with JF? Thanks for replying back with your guys info and input! As I have not flashed a box since the ban wave and have a couple people asking if the new FW is out.
Re: BENQ LT
Posted: Tue Mar 09, 2010 7:49 pm
Looks like iPrep needs some work still for Benq...
From Klutsh.
From Klutsh.
Well for definate iPrep in it's current state does not work with BenQ LT FW (EVen the Beta).
I need to write complete new patch routine to work with the BenQ FW, Whoever posted a ixDef on xbins obviously did not check if it would even work.
Having tried 3-4 different source FW's, using firmTool or a quick modded liteTool, every single one fails to be patched correctly.
I will try my best to get this done ASAP, but be warned I am still learning to code DOS tools.
For the time being the ONLY tool that will correctly create a BenQ-LT FW is JungleFlasher.
iPrep can still be used for reading & flashing, just not patching.
Re: BENQ LT
Posted: Thu Mar 11, 2010 3:35 am
Laymans terms please. What the hell does this mean?????????iPrep can still be used for reading & flashing, just not patching
Re: BENQ LT
Posted: Thu Mar 11, 2010 3:47 am
It means either wait until Klutch releases an update to iPrep or use jungle flasher to flash ur benq.
Re: BENQ LT
Posted: Thu Mar 11, 2010 4:49 pm
It means once you get your dump, you will need to use jungleflasher to build your hacked fw and then use iprep to flash it. iprep isn't building the hacked firmware right from what I understand.
Re: BENQ LT
Posted: Mon Mar 15, 2010 4:34 am
I've just flashed up to LT on my benq and it works great. I used Jungle flasher.
Only downside, I plugged in the network cable and I have been banned.
Not connected it to the net in 12 months or so, they must have caught me before that. Ah well.
Only downside, I plugged in the network cable and I have been banned.
Not connected it to the net in 12 months or so, they must have caught me before that. Ah well.