Robin Hoods Playground

ok all i have a 7 serious lite-on that is flashed with the 1.7 lite-on firmware i need to flash it back to the ofw i have the key and everything how do i flash it back using ofw using jf1.70b

open jungle flasher and in the firmware tool tab open target firmware (original F/W) when the original F/W is loaded up you will have to click the manual spoof tab then find your key on your computer and load it in to your F/W then click save to file tab and save the F/W then jump strait to flashing the drive do not read if you have the key

ok is this right open up jungle flasher 1.70b open target firmware i add the ofw and then open source firmware i add my dummy bin file then click spoof then save as lite_cfw file then flash it ? back to original firmware?

no not the dummy bin just the key.bin

ok when i spoof it its giving me this serial 55AA55AA55AA55AA55AA55AA55AA55AA thats way diffrent from the 1 i have i check it out why?

are you manual spoofing the key in to the drive or just clicking spoof to target

got it now if i wanna put back on the hack firmware do i do the same procedure

what should i do manually spoof or spoof to target wich is better

manually spoof then jump strait to flash do not read the drive just flash