Robin Hoods Playground

Hello Merry men and women, I have just tried to reflash my xbox to a newer version from 1.41 to 1.6 , then from from 1.6 to 1.61 benq, the problem is
all the games that are wave 3 or above are (patched) not working, i ripped my backups with kreon. Have i flashed correctly? here is the log. Even a game which is wave 3 unpatched is not working, Im getting a "to play this disc put it in an xbox 360 console".
JungleFlasher 0.1.67 Beta

Session Started Wed Mar 03 14:05:47 2010
This is a 32 bit process running on 2 x 32 bit CPUs
PortIO is installed and running.
Found 4 I/O Ports.
Found 1 Com Ports.
Found 5 windows drives A: C: D: E: F:
Found 2 CD/DVD drives E: F:
Sending Magic Keys to Drive on port 0x0x9C00
..........................................
Done!
Sending Vendor Intro

Requesting Device ID
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Sending Vendor Intro to port 0x9C00
Serial flash found with Status 0x73
Sending Device ID request to port 0x9C00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x9C00
Serial flash found with Status 0x73
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Benq Dump file saved to C:\Documents and Settings\edited \Desktop\JungleFlasher.0.1.67.Beta\JungleFlasher v0.1.67 Beta (50)\firmware\BENQ-OFW1.6.bin
Loading MTK_Flash source file
Inquiry string found
Identify string found
DVD key found @ 0xE030 key is FE2A169AFDE7A453885BE395
Firmware is Benq OSIG: PBDS VAD6038-64930C
Firmware type is: iXtreme v1.61-12x-FINAL-VAD6038
Key database updated
Loading target file C:\Documents and Settings\edited \Desktop\JungleFlasher.0.1.67.Beta\JungleFlasher v0.1.67 Beta (50)\firmware\ix161-benqs.bin
Target File MD5 hash is: 04412113583fe832a5b0f64c94f09972
Inquiry string found
Identify string found
DVD key found @ 0xE030 key is FE2A169AFDE7A453885BE3950 edited
Firmware is Benq OSIG: PBDS VAD6038-64930C
Firmware type is: iXtreme v1.61-12x-FINAL-VAD6038
Target f/w saved as: C:\Documents and Settings\edited\Desktop\JungleFlasher.0.1.67.Beta\JungleFlasher v0.1.67 Beta (50)\firmware\Benq_CFW.bin
Spoofing Targe
DVD Keys are already the same
Inquiry strings identical
Identify strings identical
Getting Status from port 0x9C00
SPi flash found with Status 0x73
Sending Chip Erase to Port 0x9C00
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0x9C00

by the way my original xbox games work, and my wave 2 backups do, could it have to do with the angle adjusting that xbc does?

Your JF log is fine, the drive seems to be flashed to 1.61 fine. Angles don't really matter with 1.51 or newer.

Try re-burning one of your wave 4/5 backup's without patching it, then try it on your xbox. I've never messed with patching the wave of a game, but I can tell you, your drive appears to be flashed, and you said your wave 2's work, so the flash was successful.

THANKYOU HAGGARD SMURF , SORTED THE PROBLEM KNOW JUST FLASHED TO LT , ALTHOUGH A SLIGHT NEW PROBLEM , THE DRIVE IS ALOT NOSIER THAN IT USE TO BE. WHEN I WAS ON 1.41 , COULD THAT BE BECAUSE OF THE SPEED OF THE DRIVE, I THINK IT WAS 6 SPEED OR MAYBE 8 BEFORE, IS THE LT FIRMWARE 12 SPEED?