Page 1 of 1
Hitachi 47 Won't Detect in the Drop down list
Posted: Tue Mar 16, 2010 4:46 pm
by 15thPeak
I disabled the drivers in windows for the VIA chipset and used VIA only in jungleflasher, then proceeded to put drive in mode b, but when I try to continue I can't find the drive in the drop down list.
Here's a picture. Thanks guys
Re: Hitachi 47 Won't Detect in the Drop down list
Posted: Tue Mar 16, 2010 5:33 pm
by gazzer
if your going to flash a hitachi try using a sata port direct from your motherboard most work for the hitachi dont need to use the via
Re: Hitachi 47 Won't Detect in the Drop down list
Posted: Tue Mar 16, 2010 5:51 pm
by intheshade
via works too.
Navigate your way to your device manager and scan for hardware changes.
refresh JF
Re: Hitachi 47 Won't Detect in the Drop down list
Posted: Tue Mar 16, 2010 5:55 pm
by 15thPeak
Yeah scanning for hardward changes does nothing. I just restarted my computer and plugged in the sata directly into my motherboard and it doesn't show up at all.
Re: Hitachi 47 Won't Detect in the Drop down list
Posted: Wed Mar 17, 2010 9:45 am
by louisM92
The drive is in the port properties so try dump the drive then tell us what happens
Re: Hitachi 47 Won't Detect in the Drop down list
Posted: Wed Mar 17, 2010 6:13 pm
by HaGGardSmurf
You may also want to try an older version of jungle flasher, one of the version's that doesnt send mode b then scan for the hitachi.
Re: Hitachi 47 Won't Detect in the Drop down list
Posted: Thu Mar 18, 2010 4:15 am
by savatora
When using portio the drive won't show up in the dropdown box. Just dump the drive like louis09 said. Make sure that you've selected the right port properties.