Page 1 of 1
LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 11:37 am
by PeskyJay
Help
I have got a Benq drive with Ixtreme LT firmware on it and i cant seem to erase the drive it keeps comming up with "Drive returned invalid status" I,ve tried looking around for solutions but i cant seem to find any.
It also sometimes crashes when i tried pressing Benq Unlock and Intro/device ID, Whole computer crashes
it does see the drive
But does not show Flash chip properties
Using CK3 Pro
Onboard Sata
Jungleflasher 0.1.73
Sorry if this issue has been answered please help
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 12:00 pm
by louisM92
are you using a via card?
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 12:25 pm
by PeskyJay
just a sata on motherboard
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 12:48 pm
by louisM92
is this the first drive you have flashed with this motherboard or have you done a few? the motherboard may not like the benq drive
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 1:17 pm
by PeskyJay
Yea done it many times it detects it but it gives Drive returned invalid status
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 1:26 pm
by louisM92
does the drive eject or anything still? it might be a dodgy sata cable, i had the same thing happen to me before, try another cable maybe
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 1:39 pm
by PeskyJay
It opens and closes using CK3 pro
cant be the sata cable
Is it something to do with LT on the Benq?
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 1:45 pm
by PeskyJay
Using windows 7 aswell and flashed to LT using win7
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 1:54 pm
by louisM92
hmm im stuck then, if you could flash it to LT before and not now then i dont know, maybe someone else may know an answer your problem, sorry mate
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Thu Mar 25, 2010 2:12 pm
by PeskyJay
cheers mate
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Fri Mar 26, 2010 4:46 am
by PeskyJay
Can anyone help i still have this issue
Re: LT to LT 1.1 (jungleflasher keeps crashing Benq)
Posted: Fri Mar 26, 2010 6:58 am
by PeskyJay
Issue was sorted
Every time i clicked Intro/Device Id it would Crash the whole pc Windows 7
Fixed By
Making sure the Port is the One that im using Switch the drive off
Click Intro/Device ID (message appears press ok)
And then just switch it on and off the drive it should show vendor info
Then place BENQOFW
And LT1.1 in the Firmware tool tab
and then erase and write on the Mk32 tab
If anyone else gets this problem thats how i fixed it