Robin Hoods Playground

Hi all,

This issue is driving me absolutley crazy, hopefully someone can help with good advice:)

I'be flashed my Benq an friend's Benq drives a few tiems already. The 2 recent times I've done so were using my current system: Windows 7 64.

Last two flashes were: stock --> 1.61 and 1.61 --> LT 1.0

These upgrades were done using my onboard Intel SATA.

Now, here is were trouble begins:

Recently, I attempt to upgrade friend's 1.61 -->Lt 1.0 and have issues with being able to detect/see the drive with DOSFlash and latest JF. When I finally see it via DOSFLash I attempt to flash it and it freezes at Writing Bank 0. (had friend bring back drive via his home setup, using iPrep I believe

I then try to see if I can detect my drive, in order to upgrade to LT 1.1 and can't recognize/see that drive at all. I play it safe, and even order the appropriate VIA chipset sata card only to get the same exact issue.

Any suggestions? Why this issue all of a sudden?

Thanks!

sounds like your drive is locked up have a look at this http://www.robinhoodsplayground.com/for ... 197&t=7041" onclick="window.open(this.href);return false;

Hey there,

Benq drive. And drive working, not locked at all. Both drives pulled working and functional.

sfp wrote:Hey there,

Benq drive. And drive working, not locked at all. Both drives pulled working and functional.

if you have try to flash your drive and it froze and now you can not see the drive in jungle flasher your drive is locked up follow the tutorial and all will be good again.

That was just on one occasion, with friend drive, which another friend helped restore.

My issue now is simple recognition. no matter what I seem to do, I cannot get my PC with DOSFlash or JF to even see my BenQ.

Drive is functioning.

Thanks.