Robin Hoods Playground

just got a broken 360 wit 1 red light...all i need is the benq drive but how can i make sure it still works..the code i get bak from the 360 is 1022...would tha impact the or damage the drive in anyway...i want to sproof the drive into my liteon..

link removed, we have our own section for error codes here it is
http://www.robinhoodsplayground.com/for ... 101&t=2962" onclick="window.open(this.href);return false;

This will list all of the known error codes, 1022 is AV cable or encoder chip. The dvd drive should be fine if it was working before the error code showed up.

how hard is it ti fix tha ana chip..will a reflow fix this problem..and which chip is it on the board..cuz wen i open it i can see the prev owner did the penny trick as they call it...to try to fix the 3rrod then end up geting 1 red light..

The penny trick is stupid.

Based on common sense, does it seem right? Removing thermal pads from ram chip's and replacing them with pennies taped with electrical tape?

Anyways, the ana is located under the fa shroud behind the GPU its the only chip back there. I'm pretty sure you can reflow it, you may want to do some googling, ive never fixed an ana, but there are lots of people out there who have.

If your able to reflow it and fix it, you should probably buy a ana heatsink and stick it on there, that should eliminate any future ana troubles.

yea i know but i guess this guy didnt have tha good common sense...lol and the worst part he throw away the thermal pads..do u know were i can get sum just the pads havnt been able to find them by there self just in rrod kits and i dont need the hole kit..dont wanna waste a 25 bucks on a kit i dont need...

I only know of them in kit's

You might try this kit: http://www.ck3.co.uk/xecuter-rrod-360_p ... rsion.html" onclick="window.open(this.href);return false;

It includes 2 heatsink's one for the southbridge and one for the ana.

You might be able to find the pads on ebay.

Edit: You can find the pads on ebay for relatively cheap...

k thanks am check out ebay cuz there kitss r to much $$ just for pads...