Hi ive just tried to update my firmware with Iprep 101 v006.2 Beta and got to the point where you
have to select which drive your 360 is on, and the mkflash program hangs after ive selected the drive
and powered the drive back up. If i press escape i get the following message
status=00, should be 70
Err User break
Not really sure what i can do as i cant justify paying someone £50.00 to flash the drive for
me when ive got this far
Any help would be appreciated
Iprep 101 v006.2 Beta HELP
Re: Iprep 101 v006.2 Beta HELP
ok, give us a little idea as to what your working with. I take it that you have a samsung drive since your using mtkflash, but is it an ms-28 or ms-25? What sata card are you using, onboard or a card, and what chipset is it? How long are you waiting when you first turn the drive off, pressing the option for the sata port and then turning it back on?
Sadalius
No questions by PM please
No questions by PM please
-
- Peasant
- Posts: 10
- Joined: Tue Mar 18, 2008 9:20 am
Re: Iprep 101 v006.2 Beta HELP
Yeah its a samsung drive its a ms-25... chipset im not sure but when i run iprep it sayssadalius wrote:ok, give us a little idea as to what your working with. I take it that you have a samsung drive since your using mtkflash, but is it an ms-28 or ms-25? What sata card are you using, onboard or a card, and what chipset is it? How long are you waiting when you first turn the drive off, pressing the option for the sata port and then turning it back on?
""MTKFlash and DosFlash Compatible" also underneath that it says "ATI 4379 Serial ATA Controller" the turning on bit i dont really understand as in the tutorials its abit vague as im not sure what to do, I let it find the xtreme primary master then power of the xbox fully then wait 10-15 seconds then power back on the console but nothing seems to happen
Re: Iprep 101 v006.2 Beta HELP
well man you can keep trying different ports to get it to dump.
i would tell you to get this pci sata card.it will make things easier
http://tekgems.com/Products/la-pci22-vt6421a.htm
i would tell you to get this pci sata card.it will make things easier
http://tekgems.com/Products/la-pci22-vt6421a.htm
Re: Iprep 101 v006.2 Beta HELP
Sata controllers with the ATI chipsets are not compatible with the Samsung or Benq drives. I would take CoFree's advice on the addon card that he linked too with to VIA chipset.
Sadalius
No questions by PM please
No questions by PM please
-
- Peasant
- Posts: 10
- Joined: Tue Mar 18, 2008 9:20 am
Re: Iprep 101 v006.2 Beta HELP
Thanks for the fast response will have to save me pennies, ebay here i come
- Jman 31
- Ally of Robinhood
- Posts: 916
- Joined: Wed Nov 07, 2007 2:51 pm
- Location: Somewhere in the south
Re: Iprep 101 v006.2 Beta HELP
Man, they are like $12.00 usd brand new! How much cheaper do you expect to get it?
ROBINHOOD'S PLAYGROUND