This is a older video.There is a new video here at robinhoodsplayground.com
video flashing benq with iprep101 voo6
Benq Firmware Flashing Video Tutorial with IPREP 101 v005
A cofree and crypie production
This video will show you step by step how to flash a Benq Drives Firmware using Iprep 101. v005
You can download it here.
This file is approximately 38mb's and will take a while to download on slower connections.. So please be patient as it loads for you..
If you are using the 360 to power the dvd drive it will take longer for the D1 to show up.The 360 must power up.
We left out
that you should reboot the computer after the dump.Then make a backup of you orig firmware.
and that you need to put a check in the "patch MTK flash" box before you prepare destination
Another thing is what Sadalius posted.I put a copy in this post to make sure you will see it.
This was posted by Sadalius and he is right on.
Although this works pretty good, the need to verify that it wasn't a bad dumpt is still there. This is one thing that you'll hear me say alot. Check that dump for a proper key before flashing it...... After all, if you get a bad dump, that means your original is bad, your hacked is bad, and if you flash it, your drive is bad as well.
You check your firmware with "firmware toolbox v4.5 you can find it here
http://www.robinhoodsplayground.com/for ... &t=48#p101
Benq Firmware Flashing Video Tutorial with IPREP 101 v005
Benq Firmware Flashing Video Tutorial with IPREP 101 v005
You do not have the required permissions to view the files attached to this post.
- sccrbrandon4788
- Possible Ally of Robinhood
- Posts: 702
- Joined: Wed Nov 07, 2007 9:41 pm
- Location: KY
Re: Benq Firmware Flashing Video Tutorial
great video guys! iPrep seems to work great for this drive. only 2 steps now really. freakin awesome!
Re: Benq Firmware Flashing Video Tutorial
thanks
well man things will slow down now that the bans started.
well we will just wait and see.
well man things will slow down now that the bans started.
well we will just wait and see.
- sccrbrandon4788
- Possible Ally of Robinhood
- Posts: 702
- Joined: Wed Nov 07, 2007 9:41 pm
- Location: KY
Re: Benq Firmware Flashing Video Tutorial
yeah thats insane. its so, all of the sudden. but yeah, the video is great. good job.
- Jman 31
- Ally of Robinhood
- Posts: 916
- Joined: Wed Nov 07, 2007 2:51 pm
- Location: Somewhere in the south
Re: Benq Firmware Flashing Video Tutorial
Awesome Tutorial guys. The only thing I would add is to back that original firmware up before you start the flash! just in case.
ROBINHOOD'S PLAYGROUND
Re: Benq Firmware Flashing Video Tutorial
Although this works pretty good, the need to verify that it wasn't a bad dumpt is still there. This is one thing that you'll hear me say alot. Check that dump for a proper key before flashing it...... After all, if you get a bad dump, that means your original is bad, your hacked is bad, and if you flash it, your drive is bad as well.
Sadalius
No questions by PM please
No questions by PM please