Robin Hoods Playground

hey guys... so decided to upgrade my liteon v 7400 drive to lt+ today, scrambled to get all the programs i need to flash it, (lost all my pc stuff) whipped out my ck3 pro kit and fired up jf, drive detected, all looked great! then i noticed the green light on my probe was on w/o probing 707. wtf? i still tried to get dvd key and this is wat i keep getting






~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.73 Beta (108)
Session Started Tue Nov 23 17:27:32 2010

This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives C: D: E: F: G: H: I:
Found 1 CD/DVD drives E:

Sending DVDKey request to I/O port 0x1250 and COM1

................ Serial Data is bad,

DVDkey files extraction aborted


obviously had trey half open, deleted vraid drivers etc. is it my probe or the whole ck3? thanx in advance

well first you should get the new jungle flash v1.76 beta
and work with that

damn, tried your suggestion cofree, to no avail, same error. do you have any clue as to why the green light on my probe is always illuminated? (w/o probing board) is that the prob? just dont want to waste $$ on a new probe if not neccesarry

if you have dumped the drive before
just use your dump to build your new hacked firmware and flash it in

if its stock
then yes there is something going on with that probe
not sure what it could be man
i have many and none have ever done that

Right Ive reinstalled to winxp like you suggested coffree, JF is working without freezing, my drive is recognised like the OP describes but I notice it has no DVD key, when I click to get the key I get same message as this guy, Serial data is Bad. Its already been flashed before so I dont understand. Somethings always goes wrong Im pig sick I am. I dont have the original dump either as it was done last year using Iprep.

same thing is happening here i hate jungle flasher always use iprep with no problems used it from day one from time to time ive tried J.F but it never works with my computer please help we need a idef for iprep so we can get this lt+ flashed to our drives i have all the hardware and all the software for J.F ( BUT IT JUST DONT WORK)

Ok so Ive had this guy who does them for a living on the phone tonight, He spent about 2 hours and was also in remote assistance, Whats happening now is there is a disc symbol on the cursor whenever I switch on the CK3, Like as if its trying to read from the drive. Then the odd time it dont do that and he clicks the device intro button, Then Yes and I quickly turn the CK3 off and back on again its not getting the key, Its just staying on 052 or whatever it is. Now Im on XP and once again JF is not working for me. Is it possible someone could get and IX Def file so we can use Iprep please ? Ive even tried using the probe too to no avail.

The guy over the phone said its probs my VIA card, Its onboard but Ive used it in iprep without any issues, But he insists I get one of those and will work. I think the PC is trying to install the drive as sometimes Ive gone in device manager and its there with a yellow exclamation mark.

guys if you want to try iprep then i would do it like this video
build your firmware with jungle the flash with iprep
but
you must have a good dump of your firmware
to input as source in jungle flasher
you would just input your orig firmware from iprep backup folder you got when you flashed it with iprep

I was thinking of maybee you could do it like that, I dont have the backup folder anymore. So if I say load another Iextreme in iprep for instance, boot into iprep and read the drive like normal. Then go to backups folder in the stick and drag out the OFW. Then go into JF and create the hacked FW. This is the part id be stuck with Coffree, from here could you please explain how id go about doing the JF part and then putting it back into Iprep to flash. One of your fine and dandy video tuts would be incredible for everyone that wants to use Iprep.

I receieved a PM from Klutsh on ou Tube stating that there will be no iprep that will support the new LT+ past or present as he said they decided to encrypt the FW and leave him out. A massive shame. But that method would still work right ? Like I wont even need to hook the drive up while I create the FW. Please mate wack a little vid tut up.

If your drive is at version lt, and you don't have keys or backup dump, you will need to do the mra fix. This is very similar to the 9xxx series dump.
Here is a link from the jf site:
hxxp://hotfile.com/dl/70593434/46d19c0/jftut1.3.8.pdf.html" onclick="window.open(this.href);return false;
just replace the xx with tt in the link name

Hope this helps, spent a couple of hours figuring this out.

Mine has Iextreme 1.61.