Page 1 of 1
updated dash problem
Posted: Wed Dec 01, 2010 2:59 am
by ramzfan
updated my dash now my backups say disk unreadable using iextreme1.51
Re: updated dash problem
Posted: Wed Dec 01, 2010 4:54 am
by gazzer
try putting your iso files through the new abgx 360 v. 1.0.4 it should fix any problems with your game files . then reburn the game to see if it will play
Re: updated dash problem
Posted: Wed Dec 01, 2010 5:04 am
by gazzer
if you are trying to play the new games and you have the liteon drive you need to reflash your drive to the L.T+ FIRMWARE Your old backup games should still play with the new dash update as far has i am aware
Re: updated dash problem
Posted: Wed Dec 01, 2010 12:11 pm
by HaGGardSmurf
New games have ap 2.5 ixtreme 1.5 does not know how to handle these checks, and will fail. If the check's fail the game will not load.
As the other guy's have said you will need to update your FW to LT+.
If your on 1.51 and have a hitachi, the games should boot fine, and the only reason they wont boot is likely because of the dashboard on your xbox. If you updated with a game you likely dont have the full dashboard, and that is causing the checks to fail. Update through live, or download the update and use a dvd/usb to fully update your console.
Re: updated dash problem
Posted: Wed Dec 01, 2010 1:18 pm
by ramzfan
its been a while,i have liteon drive with 1.51 could some one please give me the steps to update my fw thanks,
Re: updated dash problem
Posted: Wed Dec 01, 2010 1:44 pm
by warship
you need the latest jungleflasher and the latest abgx 360 get them both from this site and reflash your firmware to LT+ ,I have just done mine from 1.6 and it's working no problem.
Re: updated dash problem
Posted: Wed Dec 01, 2010 1:48 pm
by HaGGardSmurf
Connect the drive up to your computer, and use the dummy from ixtreme button.
Make sure you get a good key, once you get the key MAKE A BACKUP. If you need to grab some masking/duct tape and write the dvd key on it, then tape it on to the drive itself.
Once you flash LT, you cannot dump the drive without doing the MRA hack (cutting and soldering).
Anyhow once the drive is dumped, grab LT+ firmware, load up your OFW as source, load LT+ as target, and follow this:
http://www.robinhoodsplayground.com/for ... 195&t=7783" onclick="window.open(this.href);return false;
(You dont need to probe the drive)
Re: updated dash problem
Posted: Wed Dec 01, 2010 1:50 pm
by ramzfan
I feel stupid, its been so long lol , i need the steps of how to with jungleflasher steps please
Re: updated dash problem
Posted: Wed Dec 01, 2010 3:54 pm
by ramzfan
in the new ixtreme which file do i use 1. 18 1.83 little lost
Re: updated dash problem
Posted: Wed Dec 01, 2010 4:04 pm
by southbound
What drive do you have man, benq, liteon (what version liteon) samsung or hitachi ???
Re: updated dash problem
Posted: Wed Dec 01, 2010 4:04 pm
by HaGGardSmurf
ramzfan wrote:I feel stupid, its been so long lol , i need the steps of how to with jungleflasher steps please
Use the video tutorial I linked.
ramzfan wrote:in the new ixtreme which file do i use 1. 18 1.83 little lost
Go on xbinx's, and go Xbox 360 > Hacked FW > Lite-on and download iXtreme-LT Plus Firmware Pack.
Go into the .rar or .zip whichever it is and go to the lite-on LT Plus folder, the firmware you want is named "LTPlus-748.bin"
Re: updated dash problem
Posted: Thu Dec 02, 2010 12:38 am
by ramzfan
no drive key detected