Robin Hoods Playground

I've been searching and can't find a solution. I Did a flash update for a friend on a already flashed Liteon 7485C to LT+ v1 and now keep getting the "Tray Open" message when trying to play a disc. After the error message a friend replaced the laser for me and the laser is in correct position but still have same results. Drive was playing originals and copies fine prior to this. Also, another friend & I have the same drive and I updated those with same fw with np.

Thank You

Turn on the 360 wait until your at the dash and remove the HDD. The box will reboot, once it reboot's put the hard drive back on and restart your xbox.

Now your games should work.

Well, it turns out somehow a diode was bad. One of the guys looking at it is pretty good with circuit boards and such and he fixed it.

I thank you for your response HaGGardSmurf. Hopefully that will help someone else down the road.

Hmm, glad it's all working.

The tip I posted was recommended by a good friend of mine, he had an open tray error on all games one day, apparently, he read a tip somewhere that suggested what I posted, he tried it and it worked.