Page 1 of 1
LT switch or fix cuts?
Posted: Mon Jan 10, 2011 12:42 pm
by no1bladesfan
Hi is there any point in buying the LT switch to get the key from my s7 liteon which has LT+ firmware in. Or just follow cofree video and fix the trace cuts yourself? thanks for the advice =)
Re: LT switch or fix cuts?
Posted: Mon Jan 10, 2011 2:24 pm
by CoFree
well man its up to you
if you have lost the orig files you dumped form the drive the first time
if you can solder then i would not spend the money and just do it like in the 9000 vid i have on the site
like i say man its up to you
Re: LT switch or fix cuts?
Posted: Sat Jan 15, 2011 1:18 pm
by no1bladesfan
thanks cofree, much appreciated man.
Re: LT switch or fix cuts?
Posted: Sun Jan 16, 2011 6:05 pm
by HaGGardSmurf
Its much easier to just cut and fix your own traces, the only real use for an LT switch is to make life easier if your flashing someone else's drive, or if you know for a fact your going to lose your OFW somehow. (It's always a pain to have to re-cut and re-fix the traces if you've lost your OFW)