Robin Hoods Playground

i have a Xenon - Non-HDMI with a lpt port adapter,@ this moment it is reading but it will take about 6 hrs to read. i would like to know how should it take. thanks in advance.

If you are using the LPT port, you should be no more then 1 hour. I have done several of these. You may want to re-check your connections. also make sure your resistors are installed correctly.

i have check all connection 6 times, shorten cables, remove diode @ lpt 11 and i have tried removed and replace 100 ohms resitter. still will not go any faster. i do not what to do next. thanks for the reply.

LPT should take 30-40 mins MAX. Try changing the settings in your bios

when i did my first jtag it was lpt and took me 2 days to read it 3 times thats when i bought a usb spi. mine was a falcon board