im replacing a benq for a benq and need HELP!!!
- Sesshomaru
- Board Warrior
- Posts: 475
- Joined: Thu Mar 27, 2008 12:23 am
- Location: Other Side of the Gate
- Contact:
Re: im replacing a benq for a benq and need HELP!!!
You could replace the BenQ with a Samsung. You just need a dump of the BenQ firmware with a valid drive key. Then you copy the drive key into the hacked firmware for the Samsung drive with Maximus Firmware Toolbox and spoof it to report as a BenQ. Then create the hacked firmware for the Samsung, create a USB boot disc with iPrep, flash with fsam, and you are good to go.
Re: im replacing a benq for a benq and need HELP!!!
you can spoof about any drive into ant console.keep in mind the v79 is all but impossible.
i would just get the same kind of drive that came in the console.That way you dont have to get into the spoofing thing.
but
its doable if need be.
i would just get the same kind of drive that came in the console.That way you dont have to get into the spoofing thing.
but
its doable if need be.
-
- Peasant
- Posts: 18
- Joined: Wed Apr 23, 2008 10:42 pm
Re: im replacing a benq for a benq and need HELP!!!
i cant find another benq. unless someone knows where to get a real vad
Re: im replacing a benq for a benq and need HELP!!!
well if you cant find a benq then i would go with a v28 samsung dvd drive.
you will have to spoof this to report as a benq drive.As long as your console had a benq to start with
you will have to spoof this to report as a benq drive.As long as your console had a benq to start with