Robin Hoods Playground

Anyone have a download link for the dosflash files you put in the root of the USB, can't find anyworking files anywere, the files that i have when i type : dosflash, i'm told i'm using a bad command...


Any help appreciated.

you can use a old iprep like this vid
read and watch this post
http://www.robinhoodsplayground.com/for ... 195&t=3226" onclick="window.open(this.href);return false;

I'm flashing an hitachi v47 cofree, JF is not finding the correct path to the CFW when i go to write i'm getting an error can't find the correct path to the firmware or what ever it is, so that's not working. Have just 2 seconds ago flashed a benq though, i don't no !

Had a look in ixtreme 1.5 folder and found some working dosfiles but the drives not registering into vender mode with dos.

Cofree does iprep work with a hitachi as 6.2 only has options to load in sammy firmware and benq firmware...

Thanks mate.

With JF that's easy. It's simply saying that the files for your hitachi aren't in the directory its expecting it to be. You can manually go in and find the files JF is requesting.

I'm not autoloading i always always manual load, i browse the computer and find the file myself, it loads up great, i must be doing something wrong.

I'm starting up with tray half open, going across to the hitachi tab sending mode b, by clicking on send mode b, then open the drive, switch the power off with the ck3, press OK tab, and when i see the dots i turn the ck3 and the power back on, then i'm reading with dump drive, save my firmware, then autoload my cfw, which is hitachi v47 LT plus then i'm spoofing source to target then clicking on flash firmware tab back at the hitachi tab...

So what's the problem. If you get that far I don't understand where you're having issues.

Not to worry mate, i've done it, some sort of problem with the firmware that i was trying to flash in went on xbins and got a replacement and i was all good.

Appreciate the willingness to help me out