CREDIT TO TEAM JUNGLE & C4EVA AND ALL INVOLVED WITH THE CREATION OF THIS TUTORIAL. I TAKE NONE AS I COPIED ALL INFO FROM JUNGLEFLASHER TUTORIAL.
Method 2 ...Using Slimkey
First select the correct I/O port and ensure drive shows up in drive properties
Then select SlimKey Button
You will be faced with Jungleflasher asking if you want to send Unlock to slim – click YES
Once Jungleflasher has carried out its Unlock Procedure – it will Automatically Grab the Key and all other required information from the drive and generate a Dummy.bin.
You will be prompted to save the generated Dummy.bin. Save this file. Having a saved copy of your Dummy.bin will enable very easy updating at any point in the future.
Jungleflasher will then proceed to Load your newly generated Dummy.bin as the Source File in FirmwareTool 32 Tab and ask if you wish to Auto-Load the latest iXtreme Firmware..... Select Yes
You will be faced with this....
Now return to the MTK Flash 32 Tab
You will notice in the log that the key has now been Verified against the drive
To be able to write the target firmware to the drive you must unlock the drive once more (it was taken out of Vendor mode to Verify the Key).
Write Firmware to the Slim 9504
Select Slim Unlock
Jungleflasher will unlock the drive and place it into Vendor Mode
(Notice that the drive shows Verified this time)
Now the drive is in Vendor Mode, select the Write Button
Writing will commence and its progress shown in the log
You are finished.
Liteon Slim 09504 Dump & Flash W/LT+ METHOD 2 (SLIMKEY)
- yamackbuddy4
- Possible Ally of Robinhood
- Posts: 83
- Joined: Sun Apr 11, 2010 5:52 pm
- yamackbuddy4
- Possible Ally of Robinhood
- Posts: 83
- Joined: Sun Apr 11, 2010 5:52 pm