CREDIT TO TEAM JUNGLE & C4EVA AND ALL INVOLVED WITH THE CREATION OF THIS TUTORIAL. I TAKE NONE AS I COPIED ALL INFO FROM JUNGLEFLASHER TUTORIAL.
There is two methods we will start with Method 1
Select MTK Flash 32 tab
First ensure it inquires on the I/O port.
Now select Slim Unlock
Jungleflasher will unlock the drive and place it into Vendor Mode
Now the drive is in Vendor Mode, simply click on the Read Button
This will produce some text in the log as it reads the original Firmware from the drive
You will also be prompted to save the file you have just dumped. It is recommended you do so!
Note: This is your original firmware – please keep it safe
Now Jungleflasher will change to the Firmware Tool 32 Tab and automatically load your OFW as the source. Then ask if you wish to Auto-Load Latest Firmware . Click yes to Auto-Load the Firmware and Auto-Spoof your data from your drive into the ixtreme.
Now re-select MT Flash 32 Tab
You will notice in the log that the key has now been Verified against the drive
To be able to write the target firmware to the drive you must unlock the drive once more (it was taken out of Vendor mode to Verify the Key)
Write Firmware to the Slim 9504
Select Slim Unlock
Jungleflasher will unlock the drive and place it into Vendor Mode
(Notice that the drive shows Verified this time)
Now the drive is in Vendor Mode, select the Write Button
Writing will commence and its progress shown in the log
You are finished.
[TUT] Liteon Slim 09504 Dump & Flash W/LT+ METHOD 1
- yamackbuddy4
- Possible Ally of Robinhood
- Posts: 83
- Joined: Sun Apr 11, 2010 5:52 pm
Re: [TUT] Liteon Slim 09504 Dump & Flash W/LT+ METHOD 1
good post
thanks
thanks
- yamackbuddy4
- Possible Ally of Robinhood
- Posts: 83
- Joined: Sun Apr 11, 2010 5:52 pm
Re: [TUT] Liteon Slim 09504 Dump & Flash W/LT+ METHOD 1
No problem man. As I acquire them I will post them here also. I used the html code on the tuts I made/borrowed in the jungle. Thats why I have not posted more. Would have to up all the pic again to imageshack. I know that you guys use url code link now so I will just put them together using url links. That way i can copy and paste the tut to both locations. Anyway enjoy guys.
- HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: [TUT] Liteon Slim 09504 Dump & Flash W/LT+ METHOD 1
Should work for most people until we can get a video guide up