Page 1 of 1

[TUT] Liteon Slim 09504 Dump & Flash W/LT+ METHOD 1

Posted: Thu Apr 14, 2011 5:16 pm
by yamackbuddy4
CREDIT TO TEAM JUNGLE & C4EVA AND ALL INVOLVED WITH THE CREATION OF THIS TUTORIAL. I TAKE NONE AS I COPIED ALL INFO FROM JUNGLEFLASHER TUTORIAL.

There is two methods we will start with Method 1

Select MTK Flash 32 tab
Image

First ensure it inquires on the I/O port.
Image

Now select Slim Unlock
Image

Jungleflasher will unlock the drive and place it into Vendor Mode
Image

Now the drive is in Vendor Mode, simply click on the Read Button
Image

This will produce some text in the log as it reads the original Firmware from the drive
Image

You will also be prompted to save the file you have just dumped. It is recommended you do so!
Note: This is your original firmware – please keep it safe

Now Jungleflasher will change to the Firmware Tool 32 Tab and automatically load your OFW as the source. Then ask if you wish to Auto-Load Latest Firmware . Click yes to Auto-Load the Firmware and Auto-Spoof your data from your drive into the ixtreme.
Image

Image

Now re-select MT Flash 32 Tab
Image

You will notice in the log that the key has now been Verified against the drive
Image

To be able to write the target firmware to the drive you must unlock the drive once more (it was taken out of Vendor mode to Verify the Key)

Write Firmware to the Slim 9504

Select Slim Unlock
Image

Jungleflasher will unlock the drive and place it into Vendor Mode
Image
(Notice that the drive shows Verified this time)

Now the drive is in Vendor Mode, select the Write Button
Image

Writing will commence and its progress shown in the log
Image

You are finished.

Re: [TUT] Liteon Slim 09504 Dump & Flash W/LT+ METHOD 1

Posted: Thu Apr 14, 2011 8:14 pm
by CoFree
good post
thanks

Re: [TUT] Liteon Slim 09504 Dump & Flash W/LT+ METHOD 1

Posted: Thu Apr 14, 2011 8:41 pm
by yamackbuddy4
No problem man. As I acquire them I will post them here also. I used the html code on the tuts I made/borrowed in the jungle. Thats why I have not posted more. Would have to up all the pic again to imageshack. I know that you guys use url code link now so I will just put them together using url links. That way i can copy and paste the tut to both locations. Anyway enjoy guys.

Re: [TUT] Liteon Slim 09504 Dump & Flash W/LT+ METHOD 1

Posted: Fri Apr 15, 2011 9:27 pm
by HaGGardSmurf
Should work for most people until we can get a video guide up ;)