Robin Hoods Playground

after a phat lite on has been flashed back to stock from the dash update can the key be retrieved using the probe 3?

someone over at hackingjungle said yes, is he correct?

i think it can
you may have to do the mra cutting hack
not sure ive never used a v3 probe

but
if you have the firmware you can just build the new hacked firmware from the dummy.bin or the OFW,CFW from the first flash
and the flash it in no need to dump the drive

im sure the whole point of the probe v3 is so you dont have to cut or solder anything

i havent dumped the drive i need to do before, it may have been updated with the new dash so just needed clearing up if the probe v3 can still pull the key after the update

thanks anyway bud!

I dumped mine after the update using the pogo mon thoin method. No cuts to the liteon dvd motherboard.

brilliant! just waiting for my prbe 3 to arrive so i can get flashing a few drives

man
it would be cool if you put something up about how to or how you use it
ive not even read about them

Made a thread about the pogo mon thoin method of dumping phat liteon drive firmware:

http://www.robinhoodsplayground.com/for ... 776#p69776

moonknight wrote:Made a thread about the pogo mon thoin method of dumping phat liteon drive firmware:

http://www.robinhoodsplayground.com/for ... 776#p69776

thanks
i copied it to the guide thread

ill make a video on using the probe 3, ill get one up as soon as i get the probe which should be tomorrow, ill keep you guys posted

cool

I flashed a light-on 83850c v1 after update and had to use the pogo mo thoin method the old way didnt work jungle flasher has a good guide on how to do it with pics its the same for all rev.just go under phat light using pmt or ck probe 3

you can retrieve the key after the update by cutting the traces and useing the probe v2 i have done it a couple of times even before the update because i found if you dont already have the key you cant use the probe v1 to get the key it wont work once it as been done before you have to cut the traces and use v2

shaky wrote:you can retrieve the key after the update by cutting the traces and useing the probe v2 i have done it a couple of times even before the update because i found if you dont already have the key you cant use the probe v1 to get the key it wont work once it as been done before you have to cut the traces and use v2

probe 3 requires no cuts mate, it works perfect!