HI There Shootsteel
Would it be possible for SHOOTSTEEL to inform us What dremmel setup/configuration was used in the making of the video toturial
YOUTUBE http://www.youtube.com/watch?v=HzBr1dT4vt8 - for the 93450C dvd drive where traces/cuts where made to drive board.
Many thanks
Dremmel feedback Required {Shootsteel} Dremel Configuration
-
360SCAMMER142
- Peasant
- Posts: 1
- Joined: Thu Sep 24, 2009 5:15 pm
Dremmel feedback Required {Shootsteel} Dremel Configuration
Last edited by 360SCAMMER142 on Sun Sep 11, 2011 1:17 pm, edited 1 time in total.
-
louisM92
- Ally of Robinhood
- Posts: 814
- Joined: Fri Jan 16, 2009 8:46 pm
- Location: The Port, not far away from the forrest :)
Re: Dremmel feedback Required {Cofree}
trace cutting isnt required with the phat liteon drives anymore, a pobe 3 will do the trick for you, as for the sputnik switch, they havent been released for long so a video tut should come up sometime on youtube.
Need your drive flashed? PM me to sort something out
OR email me at louismoylan@live.co.uk
Flashing in the UK
Also do drive replacements
-
HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: Dremmel feedback Required {Cofree}
There are 3 models of dremels I believe.
One is a base model 1 speed, the next model up had multiple speeds and the next model up is wireless. (It goes something like that, not exactly sure of the specific features but you get the idea)
So any dremel will work. Dremel is a brand name of a rotary tool, so as long as you buy a dremel you will be using essentially the same thing as cofree, no matter the model.
However louis is right, you dont need to cut anymore, your better off with a probe.
One is a base model 1 speed, the next model up had multiple speeds and the next model up is wireless. (It goes something like that, not exactly sure of the specific features but you get the idea)
So any dremel will work. Dremel is a brand name of a rotary tool, so as long as you buy a dremel you will be using essentially the same thing as cofree, no matter the model.
However louis is right, you dont need to cut anymore, your better off with a probe.
