Robin Hoods Playground

This is just a list of the new names of the firmware that M$ flashed in with the update awhile back
There have been people having trouble understanding this

____________________________________________________________________________________________
DRIVE..........................OLD FIRMWARE.....................................NEW FIRMWARE
Slim Lite-On:................PLDS DG-16D4S 9504 -.....................................> 0272
Phat BenQ:..................PBDS VAD6038 62430C/64930C -........................> 04421C
Phat Lite-On:.............. PLDS DG-16D2S 74850C/83850C/93450C -.............> 02510C
Phat Samsung: ............TSSTcorp DVD-ROM TS-H943A ms25 -....................> ms25p
Phat Samsung: ............TSSTcorp DVD-ROM TS-H943A ms28 -....................> ms28p2f9

Members are having a hard time finding the ix firmware for the 74850 drive
you would use the LTPlus-0225-v1.91.bin

--------------------------------------------------------------
Phat

Lite-on= LTPlus-025v1.91.bin
BenQ= LTPlus-benq-v1.91.bin
Samsung= LT-sammy-v1.9.bin
Hitachi= Put all Hitachi firmware files in the firmware folder of JungleFlasher (original and ixtreme)
≤ 59: use LT+ 1.1, 79 & 79: use LT+ 1.91

Slim

Lite-on 9504/0272= LTPlus-0272-v1.91.bin
Lite-on 0225= LTPlus-0225-v1.91.bin
Lite-on 0225 (mislabeled 9504)= LTPlus-0225-v1.91u.bin
Lite-on 0401= LTPlus-0401-v1.91.bin

Good post I always have to check back to find out the FW names, this'll make it easier

Great post mate.. What about sticking this with Tuts section as its good info

i did sticky it here
we can copy it some where else if you want

Just thinking its very good information if a newbie was going to flash their drive for the first time at least they will see that info and know what they need.

JungleFlasher should auto detect the correct firmware to load. The confusion comes to us peeps who are running a jtag setup. Since the dashboard updates for us are modded, the DVD drives were never flashed to the newer versions listed above.

Imagine my surprise when I went to update to 1.91 and it autoloaded 1.1 instead, and there was no 1.91 for the version of Liteon drive I have in my box.

Great post mate ive got a benq drive to flash later on, i didnt know what the corresponding firmware was for it lol