Robin Hoods Playground

ok have the latest imgburn and xbox is flashed correctly. I burned batman and driver: sanfransisco. Both the same results...box will not read dvd. When disk is inserted, it just say "play game?". I hit play, looks like something is gonna work, then just comes back to same screen. Have newest version of imgburn. Optimal is selected at DL break. I chose nothing different within imgburn. so don't know. now i have 2 coasters. Bunch of yellow xclamation marks while burning. here is the list....
W 17:43:30 User accepted disc space warning and is attempting to truncate!
W 17:43:30 Write Speed Miscompare! - Wanted: 5,540 KB/s (4x), Got: 3,324 KB/s (2.4x)
W 17:43:30 The drive only supports writing these discs at 2.4x.
W 17:43:31 Optimal layer break position exceeds L0 capacity.
W 17:43:31 Optimal L0 Sectors: 2,133,520
W 17:43:31 Maximum L0 Sectors: 2,086,912
W 17:43:31 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List
W 18:28:47 Session 1, Track 1 is smaller on the disc than it is in the image file.
W 18:28:47 Disc's Track Sectors: 4173824 (TOC Sectors: 4173824)
W 18:28:47 Image File's Track Sectors: 4267015 (TOC Sectors: 4267015)
(at the end just says operation was successful)
only thing i know i'm doing differently, is buring at 4x and not 2.4x, but again, was not mentioned to change "any" settings within imgburn. please advise and thank you. ph and all my older games play just fine.
ps i felt this was the best category to place my post.

--------------------------------------------------------------------------------

Had the same problem so changed the Disc to Verbatim and burnt them at a slower speed. All work well now! Also could be your image of the Game. Try getting from some else.

drmax wrote:ok have the latest imgburn and xbox is flashed correctly. I burned batman and driver: sanfransisco. Both the same results...box will not read dvd. When disk is inserted, it just say "play game?". I hit play, looks like something is gonna work, then just comes back to same screen. Have newest version of imgburn. Optimal is selected at DL break. I chose nothing different within imgburn. so don't know. now i have 2 coasters. Bunch of yellow xclamation marks while burning. here is the list....
W 17:43:30 User accepted disc space warning and is attempting to truncate!
W 17:43:30 Write Speed Miscompare! - Wanted: 5,540 KB/s (4x), Got: 3,324 KB/s (2.4x)
W 17:43:30 The drive only supports writing these discs at 2.4x.
W 17:43:31 Optimal layer break position exceeds L0 capacity.
W 17:43:31 Optimal L0 Sectors: 2,133,520
W 17:43:31 Maximum L0 Sectors: 2,086,912
W 17:43:31 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List
W 18:28:47 Session 1, Track 1 is smaller on the disc than it is in the image file.
W 18:28:47 Disc's Track Sectors: 4173824 (TOC Sectors: 4173824)
W 18:28:47 Image File's Track Sectors: 4267015 (TOC Sectors: 4267015)
(at the end just says operation was successful)
only thing i know i'm doing differently, is buring at 4x and not 2.4x, but again, was not mentioned to change "any" settings within imgburn. please advise and thank you. ph and all my older games play just fine.
ps i felt this was the best category to place my post.

--------------------------------------------------------------------------------

can i ask what drive is in your xbox?