Page 1 of 1

Lliteon 3.0 after flash problem

Posted: Fri Jan 13, 2012 1:45 pm
by jjblade
can any one please help me... i has upgraded my liteon from 2.0 to 3.0... i didnt have the drive key so i re dumped it with my probe and did the flash but then found that when i try to insert a back up of any kind or an origonal game it just keeps saying open tray... i used the latest jf and im on dash 14699... any help would be appreciated... many thanx in advance....

also i flashed back to the post stock firmware first then to 0251-v3.0 the drive is 74850C A0A1

nothing will play... not even dvd's

Re: Lliteon 3.0 after flash problem

Posted: Fri Jan 13, 2012 5:50 pm
by moonknight
First thing I would check is to make sure both the power harness and the sata cable are plugged in correctly, both at the dvd drive and at the motherboard...

Re: Lliteon 3.0 after flash problem

Posted: Fri Jan 13, 2012 8:50 pm
by jjblade
moonknight wrote:First thing I would check is to make sure both the power harness and the sata cable are plugged in correctly, both at the dvd drive and at the motherboard...
yup they are both fine mate.... ive had this happen to 2 lite on drives now with 8 others that i have done all been fine... im at a loss mate....

Re: Lliteon 3.0 after flash problem

Posted: Sun Jan 15, 2012 8:30 am
by yamackbuddy4
Your issue is with the laser me thinks.