Robin Hoods Playground

Hello guys,

quick question regarding the proper settings in imgnurn.
So i'm using Burnermax to unlock the full capacity of the DL Disk so that I can burn in imgburn, however, in the settings section of the notepad file it gives some settings that i must ensure is set in the burning program. They are as follows:

Force Hypertuning - Enabled
Online Hypertung - Disabled
Smartburn - Enabled
Overspeed - Enabled
OPC history - Do not clear

I have been looking the settings but can't find where to make these changes. Can some help please.

Thanks.

The only settings you need to change in imgburn are,
Layerbreak: Calculate optimal
OPC=OFF
and these can be found under, Tools, Settings, Write tab.
To make the other changes...
SB=ON
FHT=ON
OS=OFF
OHT=OFF
Use this programme, EEPROM Utility 6.2.0

Just google it and you should find it easy enough.
Hope this helps...

Dave.

Hey, Thanks Dave. This was really helpful.

Ok, so let me start by saying i'm the farthest from a newbie. I've been burning 360 backups since the beginning, literally 100's, possibly 1,000's of them. Hell, i was burbning back-ups for PS2 & using "swap magic" before the 360 was even hacked, if that gives you any idea, I've been at it for quite a while.

I have an ihas-124 with burnermax, using imgburn 2.5.6, running DVD Info Pro in the background (not sure if i still need to, but I've had failures when I've forgotten to open this when burning) & using EEPROM utility as well. I've been through all these tut's, know the deal on all the settings for ABGX1.0.6, imgburn 2.5.6, & EEPROM. I've never had issues burning with Windows XP. I recently upgraded to Windows 7, & POOF, everything is F'd up !

When I extract my games, (& even games that were previously extracted, & used to display correctly) some show as video_TS & Audio_TS, Dead Space 3 is showing as 4 .IBG files (whatever the hell they are), & a few are still showing as .iso. The .dvd files now show as "image file" in the description, but when i click the properties, it shows the extension as .dvd as it should. I went through & re-set all my settings, & now i'm getting "mis-compare" errors that I've never had. I'm about ready to tear my hair out !

I tried to re-install Windows XP, & that just seemed to piss off my computer something fierce! it said i could not do it. I suppose I could re-format drive C & wipe it completely (yes, all of my game related stuff is on an external drive), but I kind of wanted to run W7, so going back to XP is a last resort.

my questions are this:

* is it somehow possible that windows & & could have erased the burnermax firmware off of my ihas by some crazy chance? What firmware should I be looking for displayed in EEPROM to be sure that burnermax is still installed?

* Are there different settings for the aforementioned programs specific to Windows 7 that are different than XP that I need to use?

* is there a different program set other than the ones I've mentioned that I should use with Windows 7? if so, can anyone tell me what they are & what the settings are?

please, please, PLEASE can someone help!??? I just built a new home so I've got, a pool, decks, landscaping, fences, etc going on, things are insane @ my job, & this is the last thing I need right now.

If this is the wrong thread for these questions, my apologies, but I'm doing this from work so i had to sneak in quickly & this was the first related thread I found.

My Buddah forever smile upon anyone who can assist me LOL