Robin Hoods Playground

i have a xbox 360 with samsung ms 28 . yesterday when a want flashing the drive 3 leds ( 1. 3.4) flashing in red .

i need a help.

get the error code.
turn the console on.
hold the snk button.
press the eject button. it will show you the first number press the snk button again for the 2 and so on.
all 4 lights is "0"
if its a 0102 error you have the RROD that the 360 is known to get.

this type of error it have a solution or no ???

yesterday i work normally and now it didn't work i dont now why .

i don't have a drive flashed it is normal i play with original game.

if you have a solution please help me.

think you .....

Follow what cofree said in his post and tell us what error code it has and then we can tell you if its fixable or not. It may just be bad a/v cables or something simple. Let us know.

i try to get the error code but now i work if it dosn't work i will give you the error code.

think you.

I would assume you would need to do an x-clamp to fix this... With it being a sammy, it must have been an older one (I haven't seen one in a while).

hey guys, can you please explain to me what is the snk button and where do i find it?
also i played with the xbox for about half an hour and it stopped displaying on my screen but the driver works! what could it be? also the console seems to heat up quickly! my version is samsung MS 28
Thank you

the sync button is the small button that you use to sync up a new wireless controller.sorry for the confusion.

it sound like you are about to get the dreaded RROD that the 360 is known for.
you are describing the things that happen before it dies completely.

what is the x clamp and i don't understand any think about this xbox 360 it is crazy .

because when i played a game it work normally but after 30 -45 min the picture will be displayed .

but the driver work . maybee the problem is with the motherboard .because when i played with the xbox opened it is very heat.

please help.

think you.

now the xbox 360 works but nothink on the screen.

i need help.

The X-clamp is a common fix error codes 102 and 110, in other words the RRoD. It involves drilling holes into the "x-clamps" and using bolts and washers to make sure the graphics chip and CPU are connected firmly to the motherboard. The Graphics chip and CPU coming loose from the motherboard is one of the main causes of the three red lights. Read more here:

viewtopic.php?f=110&t=511" onclick="window.open(this.href);return false;

man you need to slow down.
i am having a hard time keeping up with what is giving you trouble.
here is a guide for doing a xclamp fix.
if/when you get the RROD
http://www.robinhoodsplayground.com/for ... =110&t=511" onclick="window.open(this.href);return false;

abj1505 wrote:now the xbox 360 works but nothink on the screen.

i need help.

Get the code as described to you and tell us what it is. It may be something as simple as bad audio/video cables. Take it to a buddies house and plug it into his cables. If you still get the red ring then you can panic.

no the probelm is not with the cable because the same cable work with anathor one.

but when i press on the motherboard the picture played and the 3 leds don't flashing.

maybee the problem it is with the x clamp but what i replace exactly.


think you for help.

if you press on the mobo and the things starts working then there is a good chance its the xvlap.
if it has been xclamped before it may just need a touch-up.
if it has not then the xclamp fix stands a good chance of fixing it.
here is the xclamp guid.
viewtopic.php?f=110&t=511" onclick="window.open(this.href);return false;