Robin Hoods Playground

ok so ive used firmwarre toolbox to spoof my hitachi firmware into a samsung firmware. i cant flash the hitachi using firmtoolbox everytime i try it says cannot communicate with drive. so i want to use c4eva's flashix but i would have to rename the spoofed firmware and place it in the file where flashix can find it. ive extracted the fw rar that came with flasix but there are a number of versions of fw for the same drive. in the read me file it says
Here are the full hacked versions of all fw

XX.bin is original
XX_16-?x.bin is Hacked (Media detect 2.0)
XX_16s.bin is Hacked and Firwmare STEALTH (Media detect 2.0)

so im assuming that i would rename my spoofed firmware to read 47_16s.bin and replace that .bin file with the spoofed bin file. am i right on this or ami missing something.
thanks

kennethc81 wrote:ok so ive used firmwarre toolbox to spoof my hitachi firmware into a samsung firmware. i cant flash the hitachi using firmtoolbox everytime i try it says cannot communicate with drive. so i want to use c4eva's flashix but i would have to rename the spoofed firmware and place it in the file where flashix can find it. ive extracted the fw rar that came with flasix but there are a number of versions of fw for the same drive. in the read me file it says
Here are the full hacked versions of all fw

XX.bin is original
XX_16-?x.bin is Hacked (Media detect 2.0)
XX_16s.bin is Hacked and Firwmare STEALTH (Media detect 2.0)

so im assuming that i would rename my spoofed firmware to read 47_16s.bin and replace that .bin file with the spoofed bin file. am i right on this or ami missing something.
thanks

you need to restore the hitachi drive back to stock before you flash it again.. it's the same with all hits

http://www.robinhoodsplayground.com/for ... =110&t=322" onclick="window.open(this.href);return false;

after the restore you can dump & flash with the latest firmware

hold on... after reading again - which way round are you doing it??


is it a sam drive spoofed as a hit??

no the hitachi is spoofed to a sumsung the hitachi hasnt been flashed so i dont need to do the restore i just need to know where i put the spoofed firmware so that flashix will flash my hitachi with the spoofed firmware. so the keys will be switched and i can put the hitachi in the samsung console. thanks

kennethc81 wrote:no the hitachi is spoofed to a sumsung the hitachi hasnt been flashed so i dont need to do the restore i just need to know where i put the spoofed firmware so that flashix will flash my hitachi with the spoofed firmware. so the keys will be switched and i can put the hitachi in the samsung console. thanks

if it's been spoofed my friend it has been flashed - even if it's not running iXtreme the firmware has still been re-written.. in which case you will have to restore the original firmware - u can't cross flash hits

follow the tut... it's accurate
(return it to stock, build the hacked firmware, re-apply the spoof & flash) ***always keep a backup of your key***

i got to work thanks for the help

kennethc81 wrote:i got to work thanks for the help

man
you need to go into detail what you are doing and what you think you should do.
when you start spoofing drives you can brick one in a hurry.

ok the whole misunderstanding was i was working with the dumped original firmware files the only thing i did was spoof the original firmware files i never applied it to any drives im just messing around trying things i have about 5 drives sitting around so why not.