Robin Hoods Playground

Hi,

I have a phat with CFW 5.00 M33-3 installed - I bought it pre-modded.

A friend has given me his unmodded phat, which has OFW 3.52 onboard and has a 2GB MS in it, and asked me if I can mod it so it's like mine.

My question is:

Can I do this without buying anything else? I don't want to buy a battery tool if at all possible, nor do I want to Pandorize his battery if it can't be used to power the PSP afterwards.

Thanks for any help

No, I'm pretty sure at 3.52, the only way is with a Pandora's set.... Preparing the stick couldn't be easier, just get hold of Klutshs' PSP Grader (and 4.01 OFW)

In regards to the battery, you can only use a magic (pandora) battery, if you have a magic stick in the PSP... This isn't that practical, but you can pick third party PSP batteries up for next to nothing on fleabay

Right, thanks for that

I've ordered a battery from eBay, hopefully I'll be able to turn it into a pandora rather than wrecking the OEM Sony battery

I personally do it the other way round (turn the OEM into a pandora), but that's just me... :p

when it comes to lifting the pin, I use a pair of really small cutters, like what's used for cuticles.... Make sure you just cut the one pin though, there's no going back once you snip

Well, you can go back if you can see and can solder, but it's pretty small work though.