Robin Hoods Playground

Hey in you video you say that your 707 point is soddered. can you provide a diagram on how to do that and also what conectivey kit should i get... if you could give links please

dbeerman27 wrote:Hey in you video you say that your 707 point is soddered. can you provide a diagram on how to do that and also what conectivey kit should i get... if you could give links please

U can bridge the point with solder or a liquid silver pen

2 be completly honest the best solution is with a CK3 & Probe Addon (No soldering Required)
Connectivity Kit V3 (CK3) http://team-xecuter.com/" onclick="window.open(this.href);return false;
http://www.robinhoodsplayground.com/for ... 53&p=18527" onclick="window.open(this.href);return false;

Some people have been able to bridge it with a non magnetic screwdriver,though i have not tried this myself

Yeah, until I got my CK3 probe, thats how I did it, with a small flat head jewelers screw driver.

ok I saw the 707 point being used with the probe/// with the flat head screwdriver should i insert it into the hole like the probe or should I jump it to another sodder point and if I were to sodder it where should i sodder it. I want to use Iprep... that is what I used to mod all my boxes,,,, I am used to it. (except with hitichi of course)

you would need it to bridge the r707 point

sorry i fixed the last post so that it is english.....lol i dont know why it saved like that.........thats what im asking... where do I bridge it to

Across the 2 pads at 707

dbeerman27 wrote:sorry i fixed the last post so that it is english.....lol i dont know why it saved like that.........thats what im asking... where do I bridge it to

look at the read circled spot in the pic, it shows the pads that should be bridged. the two pads right in front of the hole.

Thank you for the diagram..... that helps alot..... Ok the only other thing I need the link to purchase the ck3 connectivity kit. Oh yeah after you sodder the points together do you need to desodder them for the drive to read the disks?

No , they can be left as they are.

dbeerman27 wrote:Thank you for the diagram..... that helps alot..... Ok the only other thing I need the link to purchase the ck3 connectivity kit. Oh yeah after you sodder the points together do you need to desodder them for the drive to read the disks?

here is where i get most of mu stuff from.
http://www.modchip.ca/store/home.php?cat=284" onclick="window.open(this.href);return false;

see this thread for a review on retail sites.
viewtopic.php?f=184&t=3091" onclick="window.open(this.href);return false;

should i get the pro?

its up to you
i did