Robin Hoods Playground

right im new to this but followed most of the tutorials

i got my sata chiset of ebay one that works with xbox
soo its gon onto the dosflash and when it comes up

0) 0x9400 sata pri masteer none
1) 0x8400 sata pri masteer none
2) 0x9400 IDE pri masteer none
3) 0x9400 IDE pri Slave none
4) 0x9400 IDE pri masteer ATAPI TSSTCORP CDDVDRW SH-S202J SB02
Flash manID 0xc2 deviceid 0x14
flash type mxic/macronix
Flash size 2097152 bytes 2048kb
5) 0x1f0 IDE Pri Slave none
6) 0x1f0 IDE Sec Master none
7) 0x1f0 IDE Sec slave non

enter the number of an atapi drive:

???? what one is it im lost at this point plz help

i dont think it is seeing you dvd drive man.
what is the
4) 0x9400 IDE pri masteer ATAPI TSSTCORP CDDVDRW SH-S202J SB02
did you not undue the other drives in your computer.
your dvd drive will be the only one that should show up.
all the others should be unplugged.

yee shit ment to plug that out but it myt be my sata cable is not pickin it up or i got in the wrong slot

what i also noticed thers 3 slots for my sata cable front side n back witch onee

aww it dont matter i had the sata in the wrong slot working now

thanks anyways

cool

hi there
got past where to put number of drive gone to do the read ofw
then it comes up as file doesnt exsit and green light starts flashing on xbox 360 power light
as it does when you unplug power cable to the drive and turn on the xbox
do not know if thats anything to do with the problem
any version of iprep i have used either dosnt find the drive or will not find original firmware
it is like the dvd drive is not letting any program access it
i have in the past used extreme bootmaker, 1.4 ixtreme fw and not had probs using a usb drive and via sata card
also have a ms25 that has responded the same way, both play original games
not been able to mod a 360 since changes made to xbins/x projects
after a few long days i would really appreciate some light in this dark place i have found my self in
greatly appreciate to find out where im going wrong
cheers cherrietiger xx

well man
you are hijacking someone else thread.
you should have started your own.

you need to go into better detail of what and when it is messing up
have a look at this.
viewtopic.php?f=110&t=3558" onclick="window.open(this.href);return false;