Robin Hoods Playground

got a friends liteon to flash i wanted to try the new jf 0.0.43 but i cant get the dam thing to open downloaded it from xbins unzipped it clicked on the icon but nothing the pc just goes haywire and freezes so i went to reboot the pc and it said waiting for programme to end, so it,s working in the background anyone else have a problem starting it

no did fine for me
im running xp
what os are you running
i dont think it is ported for vista or 64bit xp

running xp home

that is odd
i would restart your computer and try again
or get it from here
and try it.
im sure the one on xbins is good but who know it could have been a bad download or something.

Might also be worth removing your portio drivers and reinstalling them.

The new JF works great for me. It solved alot of my problems, but other people aren't quite as fortunate as me. I read a post yesterday about a fellow that JF wouldn't run as long as he had portio32 installed. He could un-install it and JF would run. But as soon as he re-installed portio32, it wouldn't so you aren't alone with this problem.

On a side note, I am beta testing Windows 7 Ultimate 64 bit edition and it will run jungleflasher. I haven't tested it to see if if would read or not yet but you can bet your bottom dollar I will just as soon as I get the time too.

well same here uninstalled the drivers and it starts ok but as soon as i reinstall them bam it does,nt start, so it looks like i will be using iprep

Does JungleFlasher need the CK3lite/Pro or equivalent to work?

Jungleflasher should work with any RS232 TTL converter. The CK3 and Maximus 360 Xtractor are some examples of them and are the easiest to use IMHO.

IMHO?

In My Humble Opinion

I used JF to flash my BenQ and it worked beautifully, but now I can't read the iXtreme 1.5 fw back with JF. It reads fine with iPrep though.

Solved JF issue. Just like with iPrep you must have the drive half way out, at least with the BenQ. I can now read it and even re-flashed it with the 0800 fw to make my first backup.