Robin Hoods Playground

Hey guys..


I heard about modding 360's true a stationary computer plugged into the XboX.
Can any one help me? send me an tutorial, pls...

Thx.

Hiya vista and welcome along. The tutorials are here :
viewforum.php?f=110" onclick="window.open(this.href);return false;

Have a look through the one that corresponds to your drive (if its new the chances are its either a Benq or a Liteon) and any questions post them up.

How do i see if i have an Benq or liteon ?

thx..

If you take the fascia plate off just below where the dvd tray is there should be a hole (on the right just under the tray itself). Shine a torch in and see what colour wires you have. If they're yellow its a Liteon and either Grey or White indicates a Benq.


Benq



Liteon

Okey, thx.. But do i need to open the xbox? because i can't see the yellow or grey cabel.

Thx

I found 2 white cabels!

hey man what does the tray look like from inside.
this one

http://www.llamma.com/xbox360/repair/dv ... 360dvd.jpg" onclick="window.open(this.href);return false;
or
http://www.llamma.com/xbox360/repair/dv ... 360dvd.jpg" onclick="window.open(this.href);return false;

if none of above then i guess you will have to open it up to fully identify the drive

vista223 wrote:I found 2 white cabels!

its a benq drive mate as dalecheesy said it could be either grey or white

Well the good news is you won't have to use a probe/solder etc as the benq doesn't need it just the Liteon so that's a bonus. There are a couple of software options available to you if you decide to flash it. I tend to use iprep for benq's but some prefer Jungleflasher. Although technically you don't need a connectivity kit or similar to flash the drive the general consensus is that it's a safer option as there has been some debate if Microsoft is able to tell if the drive has been hooked up to the motherboard while flashing. The safest option would be to invest in a ck3 or similar then it might come in handy in the future if you decide to do any more.

So....
U mean that i can flash it with just program, true a stationary computer?
And i don't need anything else??

thx.

In this video: viewtopic.php?f=110&t=3557" onclick="window.open(this.href);return false;
Hes laoding Benq, but what do he load?

thx

Thats the one mate. Cofree is using a usb stick formatted and made bootable with iprep v008.8

Download available here:
viewtopic.php?f=112&t=48" onclick="window.open(this.href);return false;

Also you need to have dot.net framework installed into your pc
Available from the same download page as above

and the ixtreme 1.5 firmware to load into the iprep program.

Has he xbox connected to the computer then?

yip, you need to have it connected through a sata cable (either onboard if compatiable or a pci sata card like the Via vt6421a) and preferably an external power source like the ck3 or alternative just to be safe (although you can use your 360 to power it but not really recommended)

Can u send me some pictures? of the cabels i have to use to connect the XboX to my computer!

thx!