Robin Hoods Playground

hi coFree

so i'am back!

yesterday i get the 4 .bins '' dummy, identify, inquiry and the key.bin'' (with the jungleflasher 0.0.43b / DVD key 32) .
my question is now how to get the liteon key in my samsung drive? , because i need the key for flashing my sam drive.

maybe u got a tutorial (write link) or a short instuction?

If you're talking about spoofing a samsung into your 360, then load your dummy.bin into jungle flasher as source and ix1.5 for samsung as target. Click 'spoof to source' and your firmware is ready. Save it to file so you have a backup of it.

It's up to you how you want to flash it, and there's a loads of tutorials here. I know Sadalius has spent time organising the Tutorials section, so you should be able find something relevant to what you're after

Just out of interest, do you have a problem with your lite on drive?

no i havn't any problems with my lite on lilrevuk

lilervuk so i have to load the spoffed firmware in iprep and start flashing my samsung drive?

but what is if the firmware don't load the key in my samsung drive? e.g. key not found

#edit at cofrees tut about spoofing liteon after Save to file that saved firmware i have to load with iprep, right? and the key should be now in my samsung drive, or wrong?

If you haven't got any problems with the lite on, why don't you just flash that instead??

For the sammy...

Check your firmware with FWToolbox, just to be sure that you have the right firmware (you can check the key against your key.bin with jungle flasher)

Yeah if you did what I said earlier with jf, you'll have a hacked samsung firmware with your key and spoof info. Create your Iprep flash as normal, then browse to the backups folder on the root of the flash. Create a folder in Backup, and name it 1111111. Then create a folder in 1111111 named 22222. So now you should have Backups/1111111/22222. This is where you put your Firmware. Once you have your firmware there, rename it to SamCFW.bin (I think that's right). If you're happy with everything, shut down your pc, remove all other drives and have a go at flashing your samsung... once you get into Iprep, run fsam 1111111 22222. There's video tuts for help with iprep, I don't use it much so I'm not %100 up to date with the latest releases.

If you haven't got any problems with your lite on, I would recommend flashing that instead, especially if you want to play on live with that console

i loaded the firmware with iprep, and copied the spoof data ''sam_cfw.bin'' in my backup folder backup/1111111/22222

So i started iprep and just going to flash with fSam 111111 22222, everything is good all 4 banks reading was ok!

Now i wanted to test my Sam drive, and my drive did't read the original games!

and if i try starting dSam and read i get always ''no vaild key'' so i think my problem is the part with dSam.

how i can fix it or put in my key ?

I'm hoping you have a backup of your original key, it sounds like you do.
Sounds like a key issue to me. You probably did something wrong.

Well, after typing out the whole procedure I found a better tutorial for you with visuals.
If you can't figure this out well...dunno what to tell ya

http://team-xecuter.com/ck3/liteon_swap.htm" onclick="window.open(this.href);return false;

So basically, in a nutshell

1)open samsung xtreme 1.5 in firmware toolbox
2)load key.bin into the key spot, click save. now you have your proper key in the custom firmware.
3)spoof. hit tools --> spoof drive...select custom...then it will ask for your inquiry.bin

done, your custom spoofed firmware. Now reboot computer with iprep drive and flash as per normal flashing instructions. the samsung drive is the easiest of them all in my opinion

on a side note, i just wanted to say...before you do ANYTHING else or try flashing the liteon,

BACK UP your dumped bin files. Then back it up again. And a 3rd time just to be sure.
I've seen way too many people make that mistake

thx amp3d everything is fine but iprep don't load the spoofed firmware from firmware toolbox 4.8 theres a error '' No valid Firmware Loaded. ''

and i back up my .bin files 3 times =)

mAssAkeR wrote:i loaded the firmware with iprep, and copied the spoof data ''sam_cfw.bin'' in my backup folder backup/1111111/22222

Did you follow lilrevuk's advice and rename it samcfw.bin without the _?

sure i renamed it to SamCFW.bin

but my problem is where I have to read SamOFW.bin
is there another way to flash ? without iprep

You can flash with dosflash or jungleflasher. iprep uses dosflash though.

so i flashed my lite-on and i think i burn wrong my game i loaded my .dvd data in clone cd and burn with 2,4x it won't work, so i hope here is a thread for burning xbox360 games (no originals) =)
The samsung drive read all dvds are there for the liteon special dvds? or reading liteon same like samsung

Maybe try different media as the liteon mightn't like the discs you use and check that you have the layer break correctly set. Most people tend to prefer verbatims. Sorry to point this out but it might be an idea not to mention that your not backing up originals though as it goes against forum rules.

mAssAkeR wrote:i hope here is a thread for burning xbox360 games (no originals) =)

well that would be the first problem
we dont support anything
but
backing up your own orig game disc.

get a orig and start over
then we may have some more help we can offer.

Did you finally get copies of the games you OWN working?
Try burning with XBC I have had good luck with that program.

Make sure your bitsetting is set to DVDRom. If you don't know what bitsetting is google it. I think a post is going to have to be made about this because it is something that seems to come up all the time. People get frusterated because they keep making coasters when really the drive they are using isnt able to make them anyways. I actually got a PM from another member on here today about it.

Can you tell us what dvd burner model you are using?