Benq 1.1 to 1.4 using IPrep
Benq 1.1 to 1.4 using IPrep
What would be the procedure to flash a Benq drive from ixtreme 1.1 to 1.4 using IPrep?Many thanks.
- sccrbrandon4788
- Possible Ally of Robinhood
- Posts: 702
- Joined: Wed Nov 07, 2007 9:41 pm
- Location: KY
Re: Benq 1.1 to 1.4 using IPrep
im waiting for this answer too... im trying to just flash over it but my computer is hating me this time.
Re: Benq 1.1 to 1.4 using IPrep
do it just like it has not been flased before.
build the iprep usb flash with the firmware you want
boot to the flash
do the dump/read
then you can go strait to the erase/flash
that is the way ive done mine
build the iprep usb flash with the firmware you want
boot to the flash
do the dump/read
then you can go strait to the erase/flash
that is the way ive done mine
Re: Benq 1.1 to 1.4 using IPrep
Many thanks,