Benq 1.1 to 1.4 using IPrep
Posted: Tue Dec 11, 2007 6:15 pm
What would be the procedure to flash a Benq drive from ixtreme 1.1 to 1.4 using IPrep?Many thanks.
Robin Hoods Playground
Welcome to Robin Hoods Playground
http://www.robinhoodsplayground.com/forum/
Benq 1.1 to 1.4 using IPrep
http://www.robinhoodsplayground.com/forum/viewtopic.php?t=389
Page 1 of 1
Re: Benq 1.1 to 1.4 using IPrep
Posted: Tue Dec 11, 2007 6:17 pm
im waiting for this answer too... im trying to just flash over it but my computer is hating me this time.
Re: Benq 1.1 to 1.4 using IPrep
Posted: Tue Dec 11, 2007 7:13 pm
do it just like it has not been flased before.
build the iprep usb flash with the firmware you want
boot to the flash
do the dump/read
then you can go strait to the erase/flash
that is the way ive done mine
build the iprep usb flash with the firmware you want
boot to the flash
do the dump/read
then you can go strait to the erase/flash
that is the way ive done mine
Re: Benq 1.1 to 1.4 using IPrep
Posted: Wed Dec 12, 2007 5:49 am
Many thanks, 