Page 1 of 1

need help please

Posted: Tue Feb 24, 2009 3:03 am
by xexclusivex
need help i think i bricked my hatichi drive when i was flashing my computer froze and now it dont work but i do have the key and a extra samsung drive how can i put the hatichi key in the samsung to get it to work. or since i have the key is there a way to restore it i have the original.bin but the drive wont open or close its a v79 please help.

Re: need help please

Posted: Tue Feb 24, 2009 8:45 am
by CoFree
well im not the best with the v79
but
i would try a restore first


if you are going to spoof in your samsung dvd drive.
just open jungle flasher input your v79 firmware with key

then input your hack samsung firmware and build a spoofed /hacked firmware then flash it in the samsung.
it will work

I would try to save the v79 first though.

Re: need help please

Posted: Tue Feb 24, 2009 2:11 pm
by xexclusivex
ok but how do i restore the drive?

Re: need help please

Posted: Tue Feb 24, 2009 2:37 pm
by dalecheesy
Use toolbox available here viewtopic.php?f=112&t=48" onclick="window.open(this.href);return false; and:

To do a Restore on Hitachi 78 and above you will need the original.bin
file that should have been read on the first installation.

- For a 78/79 restore:

- Put your Hitachi drive in ModeB

- connect the drive to the pc via the sata

- Make sure your drive is visible and has a letter asigned on Windows

- Insert a DVD Movie or a 360 game in the drive.

- Launch Fw Toolbox and open the original file for the drive, this is important
because of the variations of the 78+ firmwares.

- MAKE SURE THE DETAILS SHOWS A FULLY ORIGINAL FILE, if labels as "Spoofed"
or "XTREME" appear on the details then it is NOT an original file.

- Go to "Tools->Direct Drive Flash->Differential Flash RESTORE"

- select the drive "Read Drive and Detect Differences", a list should be populated.

- Press the "Start Flashing" button

Re: need help please

Posted: Tue Feb 24, 2009 2:53 pm
by xexclusivex
ok how do i put in mode be if it dont open?

Re: need help please

Posted: Tue Feb 24, 2009 3:53 pm
by sadalius
connectivity kit or slax. Slax probably won't work in this situation since the drive doesn't respond.

Re: need help please

Posted: Tue Feb 24, 2009 4:22 pm
by dalecheesy
Might be game over mate as the ck3 only supports upto Hitachi 59 drives and as sadalius said slax probably won't work if you can't eject the drive. At least you managed to get a good dump of the key so all's not lost.

Re: need help please

Posted: Tue Feb 24, 2009 7:14 pm
by xexclusivex
well i tried everything and nothing work i just switch the drive out with a Lite on which is better but my v79 is dead :(

Re: need help please

Posted: Tue Feb 24, 2009 8:32 pm
by HaGGardSmurf
Sell the drive on ebay for scrap, atleast that way you can make some money ;)

Re: need help please

Posted: Tue Feb 24, 2009 10:48 pm
by CoFree
xexclusivex wrote:well i tried everything and nothing work i just switch the drive out with a Lite on which is better but my v79 is dead :(
this guy may buy it
http://www.team-modfreakz.com/" onclick="window.open(this.href);return false;