I'm having problems flashing my Samsung MS28 drive. Here is what I've done. I am using iPrep ver. 008.8 and iXtreme 1.5 - 12x. I am able to boot off my usb and successfully read and write the firmware. My problem is when I tried to play games (retail and burned) I get a "to play disc, put in an xbox 360 console). The drive worked fine prior to my attempt to update the firmware. I have also tried the drive in another console with the same results. I have also tried an older version of firmware (1.4 - 8x) with the same results.
Get this after read:
Get this after write:
When trying to play a game:
(Hope it's ok to link to the pix)
Any help would be greatly appreciated.
thanks!
Problem with flashing Samsung
Re: Problem with flashing Samsung
man if it wont even play a orig game then there is something wrong with the key.
it may have the wrong one or some thing.
at this point
i would flash it be orig firmware and just get it play orig games
then start over after that.
it may have the wrong one or some thing.
at this point
i would flash it be orig firmware and just get it play orig games
then start over after that.
- Backslash
- Possible Ally of Robinhood
- Posts: 744
- Joined: Sun Jan 04, 2009 1:51 am
- Location: New York
- Contact:
Re: Problem with flashing Samsung
yeah man thats weird. dump the drives key a couple times and compare, i mean hopefully it didnt brick your drive.same results.
-
- Bandit
- Posts: 116
- Joined: Sat Jan 10, 2009 10:01 pm
Re: Problem with flashing Samsung
For now, I'd check the original key is good. Also
Make sure your backup games are stealth patched.
Also, it sounds more like a bad laser. I don't think the drive is bricked though. Try to adjust the DVD pot laser or replace the old laser with a new one.
Make sure your backup games are stealth patched.
Also, it sounds more like a bad laser. I don't think the drive is bricked though. Try to adjust the DVD pot laser or replace the old laser with a new one.
Re: Problem with flashing Samsung
I am having the same problem... I know i have the original firmware but not quite sure how to write it back to the drive and help would be sweet
Re: Problem with flashing Samsung
Hey R3n you should have started your own thread, but it's cool. Use the same method as doing the CFW, make a copy of the OFW and rename it i think....sam_cfw.bin and put on the flash drive. Do the Fsam 1234567 12345 and when prompted type sam_cfw.bin. if you need anything just post up or start a new thread.R3n wrote:I am having the same problem... I know i have the original firmware but not quite sure how to write it back to the drive and help would be sweet
[url=http://www.xboxlc.com/profile/rkd2398[/url]
Please No Questions by PM, Use the board that's what it's for.
Please No Questions by PM, Use the board that's what it's for.