Robin Hoods Playground

so what are you using to flash that lite-on? cofree you said your not use a via chipset, so what are you using instead of a chipset? is it just using a usb port with no chipset?

you may have heard it wrong but he is using the via card. . .

so look into these if you haven't already:
the card

you'll also need a flash drive to set up your boot files

and either of these to hook eything up if you're gonna bridge the 707 points with solder
ck3 lite
ck3 pro

or use this with those and no solder needed
probe

i bridge the points with a small screwdriver, works for me but some just get those products. . . follow the video and you should be good from there

thanks man, i said it wrong through he is using jungle flasher without the via chipset. i know he is connecting with the usb but if he is not using a chipset what is he using?

onboard sata port instead of a pci card.

is there any specific onboard sata port you need? thanks

It's kind of hit or miss. Some mobo sata ports will work, I use a nForce 630i, on all the drives I've done so far. I also depend pretty heavily on Jungle Flasher. Check out this link.

TheFuture20 wrote:is there any specific onboard sata port you need? thanks

all you can do is try your onbo and hope it works.

so if your onboard sata doesn't work you won't be able to get far enough to mess up your lite on drive? thanks everybody for all of yall help and now i am understanding more and be on my way of flashing 360 for my friends yes!