Well earlier i set out on fixing my bad hard mod of a battery that i used to mod my PSP, and i have done it. I used a dremel to get to the trace better, i put a blob of solder on the pin and pad and voila turned it on, and checked in PSP Tool, the battery is a Normal Battery once again.
By the way, It was sheer luck I got this to work. =)
Here's some photos of my craftsmanship.
Re-Soldered Clipped 5th Pin
Re: Re-Soldered Clipped 5th Pin
Good work dude. See, I told you it could be done
And if at first you don't succeed..? Order the damn card! http://tekgems.com/Products/la-pci22-vt6421a.htm
Mirc is a place to chat, post up on the site for help!!!
Re: Re-Soldered Clipped 5th Pin
Nice work. Wouldn't an xacto knife had worked just as well to reveal the trace?
RHPG, home away from home
- Backslash
- Possible Ally of Robinhood
- Posts: 744
- Joined: Sun Jan 04, 2009 1:51 am
- Location: New York
- Contact:
Re: Re-Soldered Clipped 5th Pin
Well i used the dremel on the actual chip, so i dont know maybe next time this happens ill do it that way.