Page 1 of 1

flashed liteon but won't play backups

Posted: Fri Mar 13, 2009 9:35 pm
by stutterman
hi i have flashed my liteon but will not play tom clancys hawx it say's up date required then it say's up date failed can't install the up date this disc is unredable. herh is a copy of my jf log
JungleFlasher 0.1.51 Beta

Session Started Fri Mar 13 23:37:12 2009




This is a 32 bit process running on 2 x 32 bit CPUs

Found 4 I/O Ports.

Found 1 Com Ports.

Found 6 windows drives.

Found 2 CD/DVD drives.





Sending Lite-On-Erase request to port 0xE800

Drive returned Status 0xD0

................

Serial flash found with Status 0x72

Sending Vendor Outro to port 0xE800

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes



Getting Status from port 0xE800

SPi flash found with Status 0x72



Sending Chip Erase to Port 0xE800

Blank Test !



Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Blank verified OK !

Loading target file H:\XBOX360 DRIVE KEYS\Copy of josh xbox\Lite_CFW.bin

Target File MD5 hash is: f174a07a581b2cf6d12e7d9561401725

Inquiry area found

Current DVD key is A55A55AA5A55A5A5A5A55A5A5A5A55A5 EDIT BY: TECHNOE, to hide dvd key.

Firmware is a Lite-On encrypted iXtreme OSIG: PLDS DG-16D2S 7485

Firmware type is: iXtreme v1.51-12X



Getting Status from port 0xE800

SPi flash found with Status 0x72



Sending Chip Erase to Port 0xE800

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !



Sending Vendor Outro to port 0xE800

also check it with dummybin fixer(lite-on)
please help

Re: flashed liteon but won't play backups

Posted: Fri Mar 13, 2009 10:32 pm
by iamwatt
question might seem silly but did you flash with the new 1.51 firmware? also does it load any other backups?

Re: flashed liteon but won't play backups

Posted: Fri Mar 13, 2009 10:34 pm
by CoFree
will it play a orig game :?:

Re: flashed liteon but won't play backups

Posted: Sat Mar 14, 2009 8:23 am
by stutterman
hi yes i did flash with the new 1.51 it dos play other backups & orig games
could it be any thing to do with the update it has loaded the new nxe. i loaded the orig duumy as source & open target with new 1.51 then spoofed. then liteon erase .then write. then outro/ata reset

Re: flashed liteon but won't play backups

Posted: Sat Mar 14, 2009 1:15 pm
by CoFree
sounds like you flashed in the 1.5 not the 1.51

Re: flashed liteon but won't play backups

Posted: Sat Mar 14, 2009 2:17 pm
by stutterman
hi just re flashed to be save. put hawk in drive ask to update then played fine
then i turn xbox off and on. game ask to up date and as befor sed can't update clean disc
did not have hhd on the drive. if open target is new 1.51 & source firmware is orig dummy then spoof
are you puting the 1.5 over the 1.51 or is it the other way round

Re: flashed liteon but won't play backups

Posted: Sat Mar 14, 2009 2:36 pm
by CoFree
well
if it played it even for a few min
then it has v1.51 firmware in it

it dont matter what hd is on it.
now
it looks like there is some thing with your burn

Re: flashed liteon but won't play backups

Posted: Sat Mar 14, 2009 2:39 pm
by stutterman
ok thank for that .i will re do burn and get back to you a.s.a.p

Re: flashed liteon but won't play backups

Posted: Sun Mar 15, 2009 5:50 am
by stutterman
hi it was the disc burned new one everthing fine

Re: flashed liteon but won't play backups

Posted: Sun Mar 15, 2009 11:33 am
by Backslash
Good to hear, usually it's either that the media is bad or the laser is worn out too much that it can't read backups.